Wonders Technology P1 True Wireless Earbuds User Manual
- June 5, 2024
- WONDERS TECHNOLOGY
Table of Contents
User Manual
True Wireless Earbuds
Appearance
Charge
Charging the Earbuds
- Put the earbuds into the charging case, they will power off & be charged automatically When the red led lights up, it means that earbuds are being charged from the charging case.
- The red light will turn off when the earbuds are fully charged.
Charging the Charging case
- Connect case with USB-C cable to 5V 1A adaptor or PC to charge, the blue indicator lights keep flashing when charging.
- The blue indicator lights will stop flashing when the case is fully charged.
Note: Please charge at least 10 minutes for the first time use and when the battery is too low.
View battery level
After the earbuds connect to the phone, you can check the earbuds’ power in
the phone status bar.
Power ON/OFF
Power ON
- Open the charging case, pick up the earbuds from the case, and the earbuds will automatically power on.
- Touch the L/R earbuds for 4 seconds to power on, there is a voice tip ” power on.
Power OFF
- Put the earbuds back into the charging case, close the lid and it will automatically shut down.
- Touch the L/R earbud for 7 seconds to power off, there is a voice tip ” power off”.
Wear Tips
Please take the earbuds from the charging case and wear them according to the label L/R.
Note: After use, please put the earbuds back into the charging case in time to extend their life and prevent loss.
How to pair
- Take out the L&R earphones from the charging case, and they will automatically power on (LED flashes Red) and pair with each other.
- Once they are successfully paired with each other, the LED of one earphone goes off, and the other flashes Red and Blue alternately.
- Please turn on the Bluetooth on your device and choose P1 to pair. The LED turns off when the earphones pair with the device.
Note: The signal transmission distance is <10m, it works normally; if Om, it will be interrupted.
Connection interrupted
When the device turns off Bluetooth or exceeds the connection range, the
earbuds automatically enter the waiting state for connection; if they are not
connected to any device within 5 minutes, the earbuds will power off.
Automatically connect back
If the earbuds are in the charging case, open the charging case, the earbuds
will automatically connect back to the recently connected Bluetooth device; if
no connection record is detected within 15 seconds or no Bluetooth device can
be successfully connected back, the earbuds will automatically enter the
search pairing state.
Operation & Response
Incoming call
| Tap L / R
---|---
| Touch L / R for 2 seconds
| Touch L / R for 2 seconds
Voice assistant
| Triple tap LJR to turn on/off Sir/Google voice assistant.
---|---
Factory reset
| Touch L / R for 6 seconds.
---|---
Warning: To prevent hearing damage, please do not use this product at high volume for a long time.
Music mode
| Tap L/R
---|---
| Double-tap L
| Double-tap R
Game mode
| Touch and hold L / R for 2 seconds to turn on/off game mode.
---|---
Sound alert one beep game mode off, two beeps game mode disconnect.
DUT mode
DUT mode | Triple tap L / R without connection. |
---|
Earbuds Led Indicator
Power on | The red light was on for 1 second |
---|---|
Power off | The blue light is on for 1 second |
Pairing state | The main earbud flashes red and blue alternately |
Pair succeed | The light off |
Charging process | Red light on |
Fully charged | Red light off |
DUT mode | Purple light on |
Specification
Bluetooth version| V5.0|
---|---|---
Transmission distance| ≤10m|
Horn| 014.2H2.8mm 2|
Impedance| 320±15%|
Standby time| 60 hours|
Music playback time| 3 hours (75% volume)|
Earbuds battery capacity| 35mAh|
Charging case battery capacity| 500mAh|
Charging time| 2h±0.1h|
Weight| Charging case:33.3g| Earbuds:7g
Size of the charging case| 53.2729.1259.16mm|
Warning
- Never dismantle or refit the product to avoid malfunction or fire hazards.
- Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
- Keep away from extreme ambient temperatures below -20 degrees or above 50 degrees.
- Keep away from children and pets.
- Keep away from corrosive liquids to avoid damage to the product.
- Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
- If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.
This product has a built-in lithium battery. Do not expose the product to strong sunlight, or fire, or throw it into the fire to avoid explosion.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The device has been evaluated to meet general RF exposure requirements, the
device can be used in portable exposure conditions without restriction
Email: Support@fitpolo.us
FCC ID: WC2-00T82
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>