Shenzhen Jinhang Technology JH12-A 3-In-1 Wireless Charging Station User Manual
- June 5, 2024
- Shenzhen Jinhang Technology
Table of Contents
- Shenzhen Jinhang Technology JH12-A 3-In-1 Wireless Charging Station User
- 1. Specification Parameter
- 2. Compatible with WPC Qi 1.2.4 wireless charging standards.
- 3. Please MUST use our 9V/2A adapter to support iphone /Apple
- 4. LED Light indication
- 5. Warning wireless charging notice
- FCC Warning
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shenzhen Jinhang Technology JH12-A 3-In-1 Wireless Charging Station User
Manual
JH12-A
1. Specification Parameter
- Input: 9V/2A -3AQuick Charge QC3.0
- Output: 5W/7.5W/10W
- Receiving Distance: less than 4mm
- Conversion efficiency: 80%-85%
- Power: 10W(Samsung),7.5W(iPhone),3W(Galaxy Watch), (Samsung Galaxy Buds) (AirPods)
- Product Size: 1427013mm
- Weight: 320g
2. Compatible with WPC Qi 1.2.4 wireless charging standards.
- 10Wfor iPhone 13/12
- 7.5W for iphone SE(2020)/11/11 Pro/11 ProMax/XSMax/XR/XS/ X/8/8 Plus and latest model, other wireless charging phone
- 2W for Apple Airpords1 /2/3, Airpods Pro and latest model
- 2.5 W for Apple watch Series 7/SE/6/5/4/3/2/1 ( 38mm 40mm 41 mm&42mm 44mm 45mm and latest model
- 10W for Samsung Galaxy S21 /S20/S20U ultra/S20+/S10e/S10/ S10+/S9+/S9/S8/S8+/S7 edge/S7 /S6 edge+/Note21 /Note20/ 10/9/8/7 and latest model
- 3W for Samsung Galaxy Buds 2/buds+/buds live and latest model
3. Please MUST use our 9V/2A adapter to support iphone /Apple
watch/Airpods charge at same time.
4. LED Light indication
- Power on: Red and green lightal ternately flash for 3 seconds
- Green light on: Phone and airpods charging status
- Red light flash: FOD over-voltage, over-current, over-Temperature
LED light indicator for Airpods Pro
Airpods Pro on charging pad, green light on Due to Over Tempe rature Protection System of Airpods Pro. when Airpod Pro get warm.it will stop charging. green light off 30-60 seconds will restart charge when Tempereature down, green light on again. This is normal bee a use of strict Airpods Pro Over Temperature Protection System Airpods pro will fully charged in 3 hours from 0% to 100%.
5. Warning wireless charging notice
- Charging distance is 2-6mm, ii is not recommend to assemble a protective case thicker than 4mm.
- When wireless charging, there should be no metal or magnetic objects in the distance of 6cm in diameter of the center point on the back of the charging device.
- At normal room temperature(24C-28C ), phone and watch fast charge. At 30C-34’C room temperature, phone and watch slow charge Above 40°C room temperature, Due to Over Temperature Protection System of phone and watch, ii may stop charging before temperature cool down. In winter charging speed is faster than in summer.
- Please do not charge in high temperature and humid environment to avoid circuit damage.
- Please keep it out of the reach of children to avoid unnecessary accidents.
- The stand charging coil is for fast charge(10W/7.5W),the base charging coil is for regular charger(5W),so please put your iPhone on stand for fast charging. put your airpods/other Phone on base for regular charging.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Any Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>