Futurelight 51834034 WDR USB Wireless DMX Receiver User Manual

: June 5, 2024
: Futurelight

Table of Contents

Futurelight 51834034 WDR USB Wireless DMX Receiver
SAFETY WARNINGS
OPERATION
PAIRING
TECHNICAL SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Futurelight 51834034 WDR USB Wireless DMX Receiver

Thank you for purchasing this compact wireless DMX receiver with CRMX technology by LumenRadio. It can receive up to 512 DMX channels from CRMX transmitters and is compatible to W-DMX transmitters (G2/G3/G4) by Wireless Solution. Thanks to its USB-A connector it can also be used with all Eurolite devices equipped with a QuickDMX port. The receiver operates in the 2.4 GHz range of the generally approved ISM band. Adaptive frequency hopping ensures interference-free operation alongside other wireless devices (e.g. Wi-Fi and Bluetooth). The maximum range is 600 m. The receiver requires 5 V phantom power for operation.

SAFETY WARNINGS

Please read these instructions carefully before using the product. They contain important information for the correct use of your product. Please keep them for future reference.

This product is suitable for indoor use only. Protect the product against high air humidity, water or heat sources. The recommended temperature range is -5 to + 45 °C
Dnly use the product according to the instructions given herein. No guarantee claims for the units and no liability for any resulting personal damage or material damage will be accepted if the product is used for other purposes than originally intended, if it is not correctly connected or operated, or if it is not repaired in an expert way.
Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the warranty invalid.
This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
This product is maintenance-free, except for occasional cleaning. You can use a slightly dampened cloth for cleaning. Never use alcohol or solvents. Before cleaning, disconnect the product from the mains.
If this product is no longer working properly or is visibly damaged, take it out of operation and consult your local dealer. Do not attempt to repair the product yourself.
Handle the product with care, it can be damaged by impacts, blows, or accidental falls, even from a low height.

PROTECTING THE ENVIRONMENT
When to be definitively put out of operation, take the product to a local A recycling plant for a disposal which is not harmful to the environment. – Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information.

OPERATION

PAIRING

Plug the receiver into the USB port of the spotlight.
Ensure that the blue LED is off to indicate that the receiver is ready to be paired. (If necessary, unlink the receiver with the reset button.)
Now start the pairing procedure on the transmitter according to the operating instructions (normally the function key must be pressed briefly).
During pairing, the blue LED will flash quickly until the wireless connection is established. Once connected, the LED will flash slowly. The assignment of the receiver to the transmitter is kept memorized even after disconnecting the power supply.
As soon as a DMX signal is present at the receiver, the blue status indicator lights permanently. The spotlight can now be controlled via radio.

Notes:

Keep the transmitter and receiver as close as possible during pairing.
The maximum distance between the the transmitter and receiver is dependent on the ambient conditions and the transmitter”s performance. To optimize range and performance maintain a line-of-sight between the transmitter and receiver and position the devices at least 1 m above the audience, trees and other obstacles.