Sensata 6VW Series Wireless Sensor User Guide
- June 5, 2024
- Sensata
Table of Contents
6VW Series Wireless Sensor
User Guide
This document is intended to provide basic information about the
configuration, installation, and commissioning of the Sensata 6VW sensor. It
also includes information regarding safe use and regulatory approvals. For
more information, please reference the Sensata 6VW Operation Manual.
GLOBAL HEADQUARTERS
Sensata Technologies
529 Pleasant Street
Attleboro, MA 02703
Telephone: 508-236-3800
The contents of this publication are presented for informational purposes
only, and while every effort has been made to ensure their accuracy, they are
not to be construed as warranties or guarantees, express or implied, regarding
the products or services described herein or their use or applicability. All
sales are governed by Sensata terms and conditions, which are available on
request. Sensata reserves the right to modify or improve the designs or
specifications of our products at any time without notice. All rights
reserved. The Sensata Technologies logo is a trademark of Sensata
Technologies. All other marks are the property of their respective owners.
Configuration
The Sensata IQ DIY App is a powerful, yet simple tool to support the remote
configuration of the 6VW sensors. With the information gathered about your
machine assets, you can quickly navigate through the Sensata DIY app and
prepare yourself for the physical installation of the devices.
Installation and Commissioning
Before beginning the installation process:
-
Warning: The device must only be installed by a competent person is someone who has the necessary technical knowledge to inspect work equipment and plants that require monitoring. This specialist knowledge can be gained through vocational training, professional experience, and recent professional activity.
-
Warning: The asset the device is to be installed on must be in a safe condition before installation can begin.
-
Warning: Do not remove or replace the battery in a hazardous area.
-
Warning: Under certain extreme circumstances, the non-metallic parts incorporated in the enclosure of this equipment may generate an ignition capable level of electrostatic discharge.
-
Warning: The sensor shall not be installed in a location where the external conditions are conducive to the build-up of electrostatic charge on such surfaces.
-
Warning: Do not switch the device on or off or use any of the switches in the hazardous area.
-
Warning: Do not remove or replace the battery in the hazardous area.
-
Warning : Installation in an explosive environment must be in accordance with the appropriate local, national, and international standards, codes, and practices.
-
The equipment shall only be cleaned with a damp cloth.
-
The sensor shall be installed on an earthed metal frame.
-
Verify the connectivity and strength of the cellular or Wi-Fi network to ensure that the sensor will operate at the machine asset location before turning on the device. For support contact your local Field Application Engineer at
Americas
1 855 SENSATA (736 7282)
[email protected]
EMEA
Spain: +34 930 016 218
Germany: +49 391 2881460
[email protected] -
The battery comes with the device, but it is not electrically connected when the device is shipped.
-
Use your hands to unscrew and remove the blue cover.
-
Remove the isolating paper tab.
-
To stud mount the device (recommended), properly clean the mounting surface.
It should be clean and free of any residue, paint, or other objects. (Consult the Operation Manual for additional mounting options and instructions.) -
Prepare a flat surface using a spot face tool and drill a pilot hole for tapping 5. Tap for desired threading (1/4” – 28 UNF or M8)
-
Install the sensor using the stud or adapter stud (Sensata part number 6VW3-01 or 6VW3-09).
-
Turn the device on by using the slide switch.
-
Use your hand to replace and tighten the cover.
Shipping Considerations
- Contact Sensata Product Support to obtain a Return Materials Authorization (RMA) number.
- The unit was shipped to you with the battery inside but isolated. Remove the isolating paper tab to connect the battery. If returning the 6VW sensor, you may remove the battery assembly prior to shipping and dispose of it properly.
- Primary lithium batteries are regulated in transportation by the U.S. Department of Transportation and are also covered by IATA (International Air Transport Association), ICAO (International Civil Aviation Organization), and ADR (European Ground Transportation of Dangerous Goods).
- It is the responsibility of the shipper to ensure compliance with these or any other local requirements. Please consult current regulations and requirements before shipping.
Product Certifications
The 6VW sensor has several certifications and approvals including CE, FCC,
ISED, RED, CSA, and ATEX. For a complete list of product certifications, see
the product datasheet available at sensata.com
Safety Information
For personal and system safety, and for optimum sensor performance, care
should be given to reading and understanding the user documentation before
installing, using, or maintaining this device. For more information, see the
6VW Operation Manual.
For questions, contact customer support:
Sensata Product Support contact information:
Americas
1 855 SENSATA (736 7282)
[email protected]
EMEA
Spain: +34 930 016 218
Germany: +49 391 2881460
[email protected]
Battery Information
The Sensata 6VW uses a battery assembly.
For safety reasons, however, the sensor was shipped to you with an isolating
plastic tab between the battery and the terminal. You will need to remove the
isolating tab to connect the battery before installing & commissioning the
device.
Replacing the battery
The battery must not be replaced in hazardous locations.
Replace the battery assembly with only a Sensata 6VW3-05. Follow the
instructions in the User Guide for replacing the battery.
Installation Considerations
When choosing an installation location and position, consider the need for
access to the sensor.
Installation in Hazardous Areas
The device is covered by a hazardous area rating. It is the responsibility of
the user to verify that the device has the necessary approvals required for
the intended area of use. Warning: Installation in an explosive environment
must be in accordance with the appropriate local, national, and international
standards, codes, and practices. Please review this document for any
restrictions associated with a safe installation. Configure the device outside
of the hazardous area, prior to installation on the machine asset. Do not
switch the device on or off inside the hazardous area.
Temperature Limits
As a safety precaution, the following limits must be observed for
temperature:
Storage Temperature: -40 to +85C (-40 to + 185F)
6VW Operating Temperature: -10 to +85C (-14 to + 185F)
Hazardous area temperature:
Class I, Division 2, Groups A, B, C, D.
-40°C (-17°F) <= Tamb <=50°C (122°F)
ATEX IECEx Zone 0 Gas Intrinsically Safe
-40°C (-17°F) <= Tamb <=50°C (131°F)
General Notice
If the device has been exposed to a hazardous substance, a Safety Data Sheet
(SDS) must be included with the returned materials. An SDS is required by law
to be available to people exposed to specific hazardous substances.
Wireless Certifications
Telecommunications compliance
All wireless devices require certification to ensure that they adhere to
regulations regarding the use of the RF (Radio Frequency) spectrum. Many
countries require this type of product certification. Sensata works with
governmental agencies to supply fully compliant products and remove the risk
of violating country directives or laws governing wireless device usage.
Radio Equipment Directive (2014/53/EU)
Sensata complies with the Radio and Equipment Directive.
FCC approvals
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution
Changes or modifications to the sensor not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
ISED approvals
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Ordinary Location Certifications
The United States of America and Canada
UL/cUL Listed,
UL file number: E525993
cUL file number: E475882
Contains FCC ID: VPYLBEE5HY1MW
Contains FCC ID: XMR201707BG96
Include/Link to/URL FCC Supplier Declaration of Conformity
Contains IC ID: 772C-LBEE5HY1MW
Contains IC ID: 10224A201709BG96
Include/Link to/URL IC Supplier Declaration of Conformity
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Complies with Canada ICES-003(B)/NMB-003 (B)
Hazardous Location Certifications
UL 121201| Process Control Equipment for use in Class I, Division 2 Groups A,
B, C, and D
T5
Maximum ambient temperature: -40°C<=Tamb<=50°C
Electrical rating 3.6Vdc.| QUZW.E525993, QUYX.E475882 QUZW7.E525993,
QUYX7.E475882
---|---|---
CSA C22.2 No. 213’17
Applicable model numbers.
6VWBB1, 6VWBC1, 6VWBA1
IEC 60079-0
IEC 60079-11| Explosive atmospheres — Part 0 – General requirements
Explosive atmospheres – Part 11: Equipment protection by intrinsic safety “i”
Marking
IECEx: Ex is IIC T4 Ga
ATEX: CE Ex II 1 G
Ingress protection: IP68 Rated ambient temperature range (°C):
-40°C <Ta <+50°C
Electrical rating 3.6Vdc.| extra: IECEx UL
22.0006
Certificate: IECEx UL 21.0075 Issue 0
---|---|---
ExTR: ATEX US/UL/ExTR21.0079/00 Certificate: UL 22 ATEX
2686 Rev. 0
Applicable model numbers.
6VWBA2, 6VWBB2, 6VWBC2
Contains FCC ID: VPYLBEE5HY1MW
Contains FCC ID: XMR201707BG96
Contains IC ID: 772C-LBEE5HY1MW
Contains IC ID: 10224A201709BG96
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Complies with Canada ICES-003(B)/NMB-003 (B)
Conditions for Safe Use
- Shall be powered only by Sensata battery assembly part number 6VW3-05.
- Under certain extreme circumstances, the non-metallic parts incorporated in the enclosure of this equipment may generate an ignition-capable level of electrostatic discharge. The sensor shall not be installed in a location where the external conditions are conducive to the build-up of electrostatic charge on such surfaces. In addition, the equipment shall only be cleaned with a damp cloth.
- The sensor shall be installed on an earthed metal frame.
Note
The battery must not be replaced in hazardous locations. Only replace the
battery assembly with Sensata part number 6VW3-05.
Waste Electrical and Electronic Equipment
Marking for the Waste of Electrical and Electronic Equipment in accordance
with Article II (2) of Directive 2012/19/EU (WEEE). The European Directive
2012/19/EU requires marking:
- That applies to electrical and electronic equipment falling under Annex 1 Category 9 of Directive 2012/19/EU.
- That serves to clearly identify the producer of the equipment and that the equipment has been put on the market after 13 August 2005.
- That the crossed-out wheeled bin alerts the end-user to dispose of this equipment via the special recycling procedure for electrical and electronic equipment that is applicable in the country of use.
- The shown marking is attached to the product and identifies the product to fall within the scope of this directive.
Declarations of Conformity
All products are sold subject to Sensata’s terms and conditions of sale
supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS
ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES
THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY, AND
SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA
COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS RELATED
INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address:
Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA
CONTACT US
Americas
1 855 SENSATA (736 7282)
[email protected]
EMEA
Spain: +34 930 016 218
Germany: +49 391 2881460
[email protected]
Copyright © 2022 Sensata Technologies, Inc.
04/2022
Documents / Resources
|
Sensata 6VW Series Wireless
Sensor
[pdf] User Guide
6VW Series, Wireless Sensor, 6VW Series Wireless Sensor
---|---