Keelin GOT10 OBD For Vehicle User Manual

: June 5, 2024
: Keelin

Table of Contents

Keelin GOT10 OBD For Vehicle
Product Features
Components and Accessories
Basic Specifications
Installation
Set up the terminal
Use the terminal
Login the position server
Troubleshooting
Warranty rules
Operation Commands
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Keelin GOT10 OBD For Vehicle

Welcome to use our terminal， please read this manual carefully to install and operate the terminal exactly. This user manual is for reference only. If some contents and operation steps are inconsistent with those for the actual product, the latter will prevail. Using GOT10 GPS tracker, we can position, monitor the vehicle including OBD data on the position server via GPRS, GPS and Internet. It can help customers to manage transparently, reduce costs,maintain security and raise efficiency. Now it is widely used in business traffic, logistics distribution, automobile lease, intelligent transportation, shipping market, army and police, rescuing,Safety Supervision, Intelligent city

Product Features

Supports quad bands, i.e. 850/900/1800/1900MHz, universal in the world.
Easy to install, connect the OBD interface to work.
Supports single positioning and feedbacks position via GPRS at setting times.
Supports vehicle positioning and tracking.
Vehicle status and speed from OBD data is better than ACC.
Vehicle collision, falling alarm by SMS/Platform (optional).

Components and Accessories

Components

Keelin-GOT10-OBD-For-Vehicle-1

Top Front(Up side)

Keelin-GOT10-OBD-For-Vehicle-2

Environment for use

Limited working temperature： – 20℃~80℃
Storage temperature：-45℃~90℃
Humidity：<95%
sure the terminal is installed in OBD2 interface of the vehicle\

Basic Specifications

Voltage	12VDC/24VDC
Standby Current	<3mA
Work current	<120mA
GPS positioning accuracy	15m

GSM positioning

accuracy

| 100m
GPS Frequency| 1575MHz
GSM Frequency| 850/900/1800/1900

MHz

Hot/warm/cold start time| <3s，<15s，<60s
Dimensions (mm)| LWH：56.5 X 47 X 24.6
Net Weight| 45 g

Installation

Before Installation
Open the packing case, then check if the terminal is Ok and the accessories are intact, or please contact your dealer; Choosing a SIM card: You need a suitable SIM card for using the terminal, please contact your dealer if you have any question;

Install the SIM card

Pinch the sides of the front cover with one hand, the other hand gently open the back cover.

First use your thumb to press the SIM card cover, then push it outside to pull down the SIM card cover.

Now you can insert your SIM card.

Turn the installed SIM card holder door to its original position, gently push the lid with your fingers so it is locked.

Close the back cover, use a screwdriver to packaging the two screws into the the back cover.

Set up the terminal

Please refer to the Operation Commands

Use the terminal

Power on
Connect terminal to the vehicle OBD2 interface and it wll power on.

LED indicators
The red LED flickers fast when the terminal is searching for GSM network, it flickers intermittently when the terminal has registered the GSM network successfully. The blue LED flickers fast when the terminal is searching for the GPS satellite signal, it flickers intermittently when the terminal has searched the satellites and can be positioned.

Red LED(indicates GSM working state

Fast flicker	Searching for GSM network
Intermittently flicker	GSM/GPRS works

normally

Blue LED(indicates GPS signal state

Fast flicker	Searching GPS Satellites
Intermittently flicker	GPS works

normally

Inquiry position
You can write a positioning SMS sending to the terminal when inquiring about position, the terminal will reply position SMS or map link. The SMS commands please refer to the Operation Commands

Inquiry by position server
Customers can login the position server to check the position of the vehicle. Please ask your dealer for the WWW address of the position server.

Collision/falling Alarm
When vehicle is involved in violent vibration, alarm messages will be sent to the administrator’s phone, remote monitoring service platform will also get the alarm message.

Note: This function requires a device built-in power sensor (optional).

Note: SMS alarm center number must be setted, Please refer to the Operation Commands

If you have a legal ID on the position server, you can login the position server using browser. If not, please contact your dealer. Ask your dealer to provide an ID and the password. Now open the web site, use your ID and password to enter the position server.

Notice: Please get the instructions about the position server from your dealers.

Troubleshooting

Cannot connect to the position server
The terminal is never online on the position server when installed at the first time. Please check the terminal:

If the power cables are wired correctly? Pay attention to not connect them to the controlling cables of the vehicle.
If the SIM card is installed correctly? Please refer to the installation instructions.
Check the status of the LED indicators. If the terminal is OK, the red LED and the blue LED will intermittently flick.
Inquiry the parameters of the terminal via commands and check the accuracy of the parameters.

Show offline status on the position server

First check if the LED indicators are OK, if cannot check them, you can check the SIM card following next steps

call the SIM card of the terminal and check if you can hear the connect ring.
Check if the vehicle is in the area where there is no GSM signal.
Check if one terminal or all terminals are offline in the area where terminal is offline. If all terminals are offline, you should ask the network operator. If the network is OK.
Check if the SIM card has enough balance.
If the terminal becomes offline on the last day of one month, please check if GPRS is close.
Inquiry the parameters of terminal via commands and check the accuracy of the parameters.

Cannot position for a long time
If the GPS is active, but the terminal cannot be positioned for long time, please check the terminal:

If the vehicle is in the place where there is no GPS signal.
The GSM and GPS signal may be weakened if the terminal is installed in the place with electromagnetic wave absorption material(such as metal blocks), special attention should be paid if there is metal thermal insulation layer or heating layer on the front windshield, so that the position accuracy will decline, and the severe ones will not be positioned.

Position drift
Serious position drift will be found in places where GPS signal is poor. Please drive the vehicle to the open places

Instructions receiving abnormally

Check the format of the instruction.
Check if the vehicle is in the places where there is GSM signal.
Check if the SIM card is properly installed.

Warranty rules

Special statement

Technology changes, without notice.
If the color and appearance are inconsistent with those for the actual product, the latter will prevail.
The warranty card is only valid for the terminals with the following IMEI.
Please take care of the warranty card and show it with the original purchase receipts when enjoying the warranty service.

Warranty period
From the date of purchase, passive waste host has one year warranty.

After-sales
Any of the following circumstances not covered by the warranty, but may be appropriate to pay repair:

More than the warranty period.
Unauthorized removal or repair damaged.
Damage caused by improper installation, use, maintenance, custody.
The IMEI label is torn or Obscure.
Warranty certificate and product models do not match or warranty certificate be altered.
Damage caused by force majeure.