Bodon EM101 Espresso Machine User Manual

Bodon EM101 Espresso Machine

BUDAN STORY

Baba Budan is said to have introduced coffee to India, bringing seven beans from Yemen while coming back from Hajj. Inspired by Baba Budan, the newly launched brand BUDAN brings professional-caliber coffee machines, gear, and accessories to first-time home brewers and brewmasters alike. Budan’s genesis is to enable the creation of better coffee at home, by making accessible quality coffee gear to every coffee-loving household. A mid-premium range of pocket-friendly, easy-to-use, durable coffee equipment, the brand caters to the ever-growing community of coffee lovers and home brewers across India.

BUDAN ESPRESSO MACHINE

Enjoy a rich and aromatic cup of your favorite coffee right in the comfort of your home with Budan Coffee Maker. A compact and powerful espresso machine that allows you to home-brew and relish the desired cup of cappuccino, latte, americano, or more at home just the way you like it. Easy to use and maintain, this compact coffee machine can settle in any corner of your kitchen aesthetically.

KEY FEATURES

ESPRESSO MACHINE

IMPORTANT SAFEGUARDS

Before using this machine, carefully read and comply with all these instructions

DOs

1.  Ensure the machine is connected to a AC220-240V, 50Hz line
2.  Please ensure the wall outlet in your house is well earthed. This appliance has been incorporated with a grounded plug.
3.  Close supervision is necessary when the appliance is in use. Place the machine out of the reach of children and people with limited capabilities.
4.  Unplug when not in use and before cleaning. Allow cooling before assembling any part or taking off parts, or before cleaning the appliance
5.  The use of accessory attachment not recommended by the appliance manufacturer may result in fire, electric shock, or injury
6.  Be careful to ensure that the power cable does not trap itself or does not rub against sharp edges.
7. Once the machine drops or you see a suspicious defect, unplug the power plug immediately, do not operate on the machine.
8.  Clean the machine regularly
9.  Ensure pure potable water with TDS of 100-150 is used

DONTs

1. Do not place on or near a hot gas, electric burner, or heated oven.
2. If the product has malfunctioned or the cord or plug has damaged itself, do not operate it. Return the appliance to a nearest authorized service facility for examination, repair, or adjustment.
3. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
4. Do not touch any hot parts. Use the handle of the funnel.
5. To protect against fire, electric shock, and injury to persons, do not immerse cord, plug, or body of machine in water or other liquid.
6. Do not fill more than 1.7L to the upper MAX mark, when pure water is in the water tank.
7. Do not use for commercial purposes, for household use only

FOR THE FIRST USE

1. Move the coffee maker from the package, and check the accessories according to the list
2. Clean all the detachable components:
3. Operate the appliance according to the section ‘B’ and ‘C’ (no coffee powder in the filter). Repeat 2-3 times.

MAKE ESPRESSO COFFEE

1. STEP-1 Carefully remove the water tanker from the rear of the machine. Fill water and place back in possition

2. STEP-2 Ensure the water level does not exceed the max level. Close the water tanker lid.
   Note: Check frequently the water level in the tank when in use. Refill if necessary

3. STEP-3 Once the steam indicator screen starts flashing, wait for the steam indicator lights to turn on. The display shows ‘000’, indicating machine has preheated itself

4. STEP-4 Take out the filter holder and pour coffee powder adequately and press tightly to level. Clean extra coffee overflow to avoid poor sealing and water leakage

5. STEP-5  Hold the upper part of the machine with your hand and lock the filter holder counter clockwise into the middle of the group head. Put cups under the coffee outlet.

6. STEP-6 Start brewing by pressing the coffee button. You can set the flowing time by the long-press coffee button. Do not use the machine when it is unsupervised. Do not touch the hot surfaces of the machine with hands like brewing outlet, steam nozzle when the machine is in use.

7. STEP-7 It will automatically stop after 25s, now coffee is ready.
   Note: Remove the filter holder after finished, knock it out and clean it with hot water immediately, and lock it again for the next use.

FROTH MILK & CRAFT A CAPPUCCINO

1. STEP-1 Prepare espresso first in a large enough cup

2. STEP-2 Use whole cold milk out of the fridge(8°C-10°C), and pour 1/3 milk in a milk pitcher. Press the steam button and let it preheat.

3. STEP-3 Steam indicator and display screen start flashing. Wait for steam indicator lights to turn on and the display shows “000“, indicating preheating has finished

4. STEP-4 Put a stainless steel milk pitcher under the steam nozzle. Open the steam knob, rotate it to the maximum position to froth the milk

5. STEP-5 Remove pitcher when desired milk foam is achieved. Tum off the knob. Pour the frothed milk into the prepared espresso, now the cappuccino is ready. Note: Purge steam to clean the steam nozzle after use. Warning: Hot surface after immediate use

CLEAN AND MAINTENANCE

1. Before cleaning or repair, the machine should be switched off and cooled down
2. Clean with a damp cloth and do not use abrasive sponges, alcohol, or solvents.
3. Do not immerse the machine in water.
4. Clean steam outlet to ensure there is no blockage
5. Clean the outlet and the seal ring under the group head with a professional brush
6. Rinse with hot water to dissolve any coffee bean oil residue;
7. Clean all the detachable attachments in the water and dry thoroughly.

CLEANING MINERAL DEPOSITS

1. The machine builds up limescale deposits over time so it is required to descale machine every 2-3 months.
2. Pour water and descale in water tank up to MAX capacity (water and descale ratio 4:1, follow the instruction of descaling. Please use “household descale”, or you can use the citric acid replace descale (water and the citric acid ratio is 100:3);
3. Lock the filter holder (no coffee powder) into the group head.
4. Dispense 150 ml of coffee, then dispense steam for about 2 minutes and turn the knob off. Let the machine idle for 15 minutes to descale.
5. Repeat step 4 for 3 times.
6. Press the coffee button to brew coffee until there is no descale left
7. Rinse the system by repeating step 4 for 3 times
8. Repeat step 7 at least 3 times to make sure the pipe is clean

INDICATOR TIPS

POWER INDICATOR| COFFEE INDICATOR| HOT WATER INDICATOR| STEAM INDICATOR| DISPLAY SCREEN|

CAUSE

|

SOLUTION

---|---|---|---|---|---|---
| Flashing is| Flashing is| Flashing is| Flashing is| Power on| /
Lights On|

Flashing

|

Flashing

| Lights off|

Flashing

| Coffee and hot water is pre heating| /
Lights On| Lights On| Lights On| Lights off| Display 000| Coffee and hot water pre heating finished| /
Lights On| Lights On| Lights Off| Lights off| Display Seconds| Making Coffee| /
Lights On| Lights Off| Lights On| Lights off| Display Seconds| Making hot- water| /
Lights On| Lights Off| Lights Off|

Flashing

|

Flashing

| Steam is pre-heating| /
Lights On| Lights Off| Lights Off| Lights On| Display 000| Steam pre-heating finished| /
Lights On| Lights Off| Lights Off| Lights On| Display Seconds| Making steam| /

Lights On

|

Flashing quickly

|

Flashing quickly

|

Lights off

|

Display 000

|

Turn off steam button (Temperature is too high)

| Wait for temperature to fall or dispense coffee or hot water to aid cooling

Lights On

|

Lights On

|

Lights On

|

Lights On

|

Display E-3

|

NTC short circuit

| Please contact authorized service

TROUBLESHOOTING

Water does not dispense

| Water tank Is empty| Pour water in water tank

The input voltage or frequency is inconsistent

with name plate

|

Make sure the voltage and frequency is consistent

with the nameplate

No steam is generated

| Steam nozzle clogged| Clean steam nozzle

Water tank is empty

|

Pour water in water tank

Coffee leakage around the edge of the

filter holder

| Too much powder in the filter|

Turn off the machine and wait for it to cool down and clean the filter.

Then pour appropriate coffee powder

There is powder in the seal ring under group head

Water leakage below the machine| Drip tray is filled up| Please clean the drip tray
Machine malfunctions| Please contact authorized service
Machine is not working|

The power cord is not plugged well.

|

Plug the power cord into a wall outlet correctly.

The steam cannot froth.

| Steam indicator light is not ON| Wait for the steam indicator light to switch ON
The container is too big or odd shaped| Use high and narrow cup or garland cup
Used skimmed milk| Use whole milk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>