Jx Youcham Tech M-766 Kids Tablet User Manual
- June 5, 2024
- Jx Youcham Tech
Table of Contents
Jx Youcham Tech M-766 Kids Tablet
This manual contains important safety precautions and information of correct use. Please be sure to read this manual carefully before use so as to avoid any accidents.Do not place the product in hot, wet or dusty environment, especially in summer, do not leave the product inside a car with all windows closed.Avoid dropping, impacting or shaking the product violently, otherwise it may cause damages or malfunctions. Select a proper volume to avoid ear problem when using earphones.
- Do not cross the road or drive vehicles,using headphones to avoid traffic accidents.
- B e sure to use the provided chargers and accessories in the package.
- Be sure to charge the product when the following situations take place,
- The battery icon shows lower or empty.
- System automatically shut down and it turns off soon after restart.
- Operation keys do not respond properly.
- The device shows on the top right corner.
Dear Customer, Thank you so much for purchase our 7 inch kids Tablet, if you have any questions you can contact our Customer Service on our Amazon Shop.
Product Parameters
- Operating system: Android 11.0
- Display :7-inch HD Display
- Screen resolution:1024*600
- Processor frequency: 1.6Ghz
- Processor : Quad cores
- RAM: 2GB, ROM:32 GB
- Bluetooth version :4.0
- Battery: 3,000mAh
Box Contents:
- Android Tablet PC
- Device Charger
- Screen Protector
- Tablet Case
- Type-C Cable
- Manual
Power On/Off
Long press power button to tum offloff the device.it may take a minutes to
boot the device Short press power button to turn onioff the screen. (Standby
mode refer to No.3 as below
Desktop
After tuming on the device, desktop displays with shorcut icons and arrow
panel at the ight side
Standby mode(Screen off mode) /Unlock the screen
Short press power button to turn on/off the screen.(Standby mode on/off)
After standby mode o , slide the lock icon in order to unlock the screen.
System setting
On the desktop, press menu button and select system settings.
Press System Setting
wireless and network
Wi-Fi-Press Wi-Fi to turn on/off Set up each setting as you like. Wi-Fi settings – Press Wi-Fi settings, then the device will automaticaly search the available Wi-Fi signals. Select the network you want to connect with.
Data usage
Slide mobile data switch to select open or close the flow usage.
Sound
Display and storage
Set up each setting as you like. check device memory and microSD card status. unmount SD card amount the SD card for safe removal.
Battery and APP
Check battery usage status. Manage downloaded or running applications. Downloaded All installed applications are listing.
Keep pressing an application to manage. Running services Press ISninstall to uninstall the selected application. view and control currently running services.
Account & sync
Create your account. After connecting Wi-Fi network, the e-mailing system
synchronizes your account with the device. Emails are automatically downloaded
into the device.
Location services
Google’s location service – Let apps use data from souroes such as WiFi and
mobile networks to determine your approximate location
Security
Screen lock-Protect your device from unauthorized use by creating a
personal screen unlock pattern. Make passwords visible Show password as you
type. Unknown sources If you want to allow installation of non-Market
Annlications Prass lInknown snurcas and nrasses OK
install from SD card install encrypted certi cates from SD card.
Language & input
Language-Choose your preferabile language. Keyboard & input method- Change
keyboard & keyboard settings. On Language & input settings. if you need other
languages besides English on keyboard, press the relevant keyboard and enter
the chosen Keyboard settings, select Keyboards,press the Janguage vou need.
Backup &Reset Date&time
Set date & time and format
Accessibility
Set date& time and format
Developer options
Set options for application development
About tablet
See status, legal information, ETC
How to connect/disconnect the device with/from the computer On main desktop, connect the device with the PC, touch right side of the status bar on the bottom of the desktop
Press uSB connectedselect Turn on uSB slorsge The device is recagnized al Explorer of the compuief NOw you can use it as an external storage. After finishing your work, Press Turn on USB storage’to unmount it.
How to install Applications(.apk file) into the device
Method 1.
Connect the device with intemet. See above [1.Wireless& networks] in order
to connect internet. Run “Getjar and search the applications you want to
install. Follow the instruction on the screen for installation.
Method 2
- With your computer.search application fle (apk) that you want toinstall into the device.
- Download the file (apk) into your computer.
- Connect the device with your computer.
- See above [How to connect/disconnect the device with/from the computer.]
- Copy and paste .apk file into the device and disconnect from your computer.
- Run ‘File browser and nd apk le that was copied into the device.
- Press the file to install and follow the instruction on the screen.
You Note may rty downoad adudt ppicationsf you are at leseolt 18 years of age aor t leaat the age caf majrty in the juriadictien whee you neaicde ar fram which you download adut application. fyau do not meet hese reouinamenta, han you de nat hawe parmiasicn to dowriaad adat appilicason case of any probiems including legal izsues from the breach by end-users own decision, the manufacturer shal not be responsible.
How to make desktop icons
Prass the unner riaht side icon of desktnn the non-iin disnlavs
Wallpaper
Long press the desktop, press Wallpapers and select one of categories of
wallpaper. Select one you desire and press Set wallpaper.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 or the FuRules. nese limits are designed to provide reasonabie protecuon against hafmrur intererence in a residenta installaton.. Inis equipment generates, uses and can radiate radio requency energy and, not instalea and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interterence will not occur in a partiCular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- onsult the dealer or an expenenced radio/ IV technician for help.
Cauton:
Any changes or modifications to this device not explicity approved by manutacturer could voId your This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmtul interference, and this device must accept any interterence received, including interterence that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.
Specific Absorption Rate (SAR) information:
This Kids tablet meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health. FCC
RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg
averaged over one gram of tissue. Device types: Kids tablet has also been
tested against this SAR limit. This device was tested for typical body-worn
operations with the back of the Kids tablet kept Omm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain an Omm separation distance between the user’s body and the back of
the Kids tablet. The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly. The use of accessories
that do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.