InstallGear 14 Gauge AWG 100ft Speaker Wire-Complete Features/User Instructions
- June 5, 2024
- InstallGear
Table of Contents
InstallGear 14 Gauge AWG 100ft Speaker Wire
Specifications
- BRAND: InstallGear,
- MATERIAL: Aluminium, Copper,
- GAUGE: 14.00,
- PACKAGE DIMENSIONS: 4.76 x 4.45 x 3.98 inches,
- ITEM WEIGHT: 2.14 pounds.
Introduction
InstallGear is the frosted blue/black 14-gauge speaker wire. The lower the gauge number, the thicker the wire is. It is a 100-ft (30.5m) gauge speaker wire. The resistance to current flow is lower when the wire is thicker. It has CCA (copper clad aluminum) wiring. CCA wiring is a good conductor for audio transmission. When it comes to speaker wire, this is the most cost-effective option. It is covered in a rugged PVC jacket which allows for free, wide, and seamless adjustment of the wire’s required physical qualities like flexibility, elasticity, and impact resistance. It has easy polarity identification. The two-tone jacket makes polarity identification a breeze. Your audio equipment could be harmed if you make a polarity error. It has a soft-touch jacket. The cable’s jacket was created with the installer in mind. This jacket’s flexibility allows for easy routing and has low memory.
What’s in the box
- InstallGear 14 Gauge AWG 100ft Speaker Wire
How to use
You can attach the wire with the source by following the given steps :
- Attach the Banana plugs in front of the wires.
- Attach one side of the wires with the car audio systems.
- Attach the other side of the wire with the home theater system or the speakers.
- Your devices will be connected.
Frequently Asked Questions
-
Is 14-gauge wire suitable for speaker installation?
Long wire lines, high power applications, and low-impedance speakers should all use a thick wire (12 or 14 gauge) (4 or 6 ohms). The 16-gauge wire will usually suffice for relatively short runs (less than 50 feet) to 8-ohm speakers. It is both cost-effective and simple to use. -
How far can a 14-gauge speaker wire be run?
The overall resistance of the cable should be less than 5% of the speaker’s rated impedance, according to the guideline. Because your Insignias are 8-ohm speakers, 16 gauge is good for a 48-foot run (per speaker). 14-gauge speaker wire has an 80-foot range and 12 gauge has a 120-foot range. -
I’m not sure if the speaker wires are positive or negative.
Color-coding: Speaker cables are frequently color-coded to make it easier to remember which is positive and which is negative. Red and black are the most prevalent color codes, with red denoting positive and black denoting negative. -
What gauge speaker wire should you use?
Connecting speakers to an amplifier or an Audio/Video (A/V) receiver is most often done with speaker wires ranging from 12 to 16 gauge. The lower the gauge number, the thicker the wire, and the higher the gauge number, the thinner the wire. -
Is it better to use 16 or 14 gauge?
The thickness of 14 gauge is greater than that of 16 gauge. With thicker wire, larger speakers or lengthy distances will sound better. Is this information useful to you? The larger the gauge, the better the sound, according to legend – but only up to a limit, as some wires lose touch or break apart. -
What is the maximum wattage that a 14-gauge wire can handle?
For a 120-volt circuit, you can load 2,400 watts onto a 14-gauge cable. -
Is it possible to have too much speaker wire?
A speaker wire should be no more than 50 feet (15.24 meters) in length, as anything longer can degrade sound quality. Although larger wires can compensate for the length, you should avoid it as much as possible. -
What happens if the speaker cable isn’t thick enough?
The only issue with using too-thin wire is that if you run enough current through it to burn it, your amp will be unhappy. If the wires melt and fuse, leaving an open circuit with no load, the amplifier will be delighted. -
What happens if the positive and negative speaker wires are mixed up?
When two identical signals with reversed polarity are combined together, the signals cancel out. One wave is positive in this scenario, while the other is negative, and vice versa. As a result, there is silence. Destructive interference is the term for this. -
Which of the speaker wires is the positive one?
The positive wire is usually red, whereas the ground, or negative is black. Most speaker wires, on the other hand, do not support color. The good news is that when it comes to speakers, it doesn’t really matter which one you choose as your positive and which one you choose as your negative as long as you’re consistent.