briidea Faraday Box Key Fob Protector, RFID Signal Blocking-Complete Features-User Manual

briidea Faraday Box Key Fob Protector, RFID Signal Blocking

Specifications

• DIMENSIONS : ‎71 x 5.12 x 3.15 inches
• WEIGHT : 9.9 ounces
• CAPACITY: 5-8 Keys
• BRAND: briidea

Introduction

The briidea Faraday box is used to protect your car from being stolen. It does this by providing a unique technology to block out the RF signals of your keyless entry fobs. The premium anti-car theft is lined with high-quality material. This material doesn’t allow the signals from the keys that are within it to leave the box. The box can be used to protect the keys of your entire family as it has the capacity to store about 5 to 8 keys. The box can be used to not only place the main key but also the spare keys and protect your vehicles from getting stolen. The inner layer of the box is made of luxurious Russian solid wood and fabrics of military grade. It has a flannel lining of the same color which avoids staining of the box, keeping it good as new. The outer layer of the box is made of high-quality PU leather. This leather is wearable and non-slippery.

The box features dimensions of 5.43″ x 4.25″ x 2.75″ and has the ability to hold 5 to 8 keys with the keyrings. This means you won’t have to carry multiple signal blocking boxes.

How does the Keyless Car theft happen?

A car is stolen almost every minute. Therefore, it has become very important to protect the keyless entry fob of your car.

• The thieves use a device to amplify the signal of your keyless entry fob.
• The signal reaches the car and fools it into thinking that the key is near it.
• The car doors open and the ignition turns on.
• The thieves can do this by being only a few meters away from the car.

How does the briidea Faraday Box prevent it?

The box is lined with luxurious materials that are used to contain the signal within the box. Simply place the car keyless entry fobs inside the box and close the box. When the keys are inside the box the RF signals are unable to transmit outside it and thus the thieves can’t amplify them.

How to test the Box?

• You can test the box by placing the keys inside it.
• Close the lid of the box and make sure to close the clasp tightly.
• Now, take the box close to your car.
• Try to open the door of your car, it won’t unlock, indicating that even if the key is near, there is no signal.

FREQUENTLY ASKED QUESTIONS

• How do you know your car isn’t getting a signal if the keys are shut inside the box in the house?
  Place your key inside the box. Close the lid of the box and make sure the clasp is tight. Now go stand next to your car with the box in your hand. Slide your hand in the handle of your car, the door won’t unlock. If you follow the same steps but leave the clasp open, the door will open.

• Does this work with older fobs? I have 2006 & 1994 vehicles with fobs that have been broken into using their fob signals.
  Yes, it does.

• What are the measurements of the box?
  The box has dimensions of 5.43″ x 4.25″ x 2.75″

• Does this block ionizing radiation? Can I store radioactive materials in here safely?
  No, it blocks only the RF signals of the keyless fobs.

• If I put my tiny phone in here, will it cut off the cellular signal? I want it off 100% not to be able to send or receive calls.
  Yes, it is expected to block out all the signals.

• Does it work for a 2019 Dodge Charger?
  Yes, it works with any keyless fob

• Will this block the GPS signal from getting through?
  Yes, it is expected to block the GPS signal.

• Does the box help keep the battery from not running down?
  The box doesn’t do anything to the battery, its just a simple box whose only function is to block out the signals.

• Do you have to remove other keys off the Key fab, house keys, storage keys, etc. when storing in the box?
  No, this isn’t required.

• Does the box lock ?
  No, it doesn’t lock.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>