THine THSEU101 Vision System Starter Kit User Guide
- June 5, 2024
- THine
Table of Contents
THine THSEU101 Vision System Starter Kit
Initial Steps Overview
Thanks so much for purchasing THSEU101, Vision System Starter Kit (VSSK).
The VSSK allows designers to evaluate features of the THCV241A serializer with
bi-directional transceiver working in pair with THCV242A de-serializer with
bi-directional transceiver, to increase the distance between an image sensor
and a video processing system over 15 meters using V-by-One® HS. The kit
allows evaluating a number of cable and connector types, such as FAKRA and
SMA. The goal of kit is to allow maximum flexibility for evaluating THCV241A
and THCV242A, serving as a design aid.
The initial steps for the VSSK
- Set-Up Hardware in SMA Configuration or FAKRA Configuration
- Obtain PC Software Suite Available on request. Please contact the person or request THine Solutions for support from www.thinesolutions.com/vision-system-starter-kit via the “Request for Support” Button.
- Obtain EZ-USB FX3 SDK from Cypress
- Set Up Software
How to Start SMA Configuration
- Connect Image Output Board to SMA Near-End Board.
- Connect SMA Far End Board to Camera Board to VSSK Camera.
- Connect SMA cables From the Far End board to the Near End Board.
- Configure DIP switches on the Camera Board and the Image Output Board as shown on the diagram.
- Connect the USB3.0 cable from the Image Output Board to the Host PC. In Windows Device Manager this device will appear under a list of Imaging Devices.
- If not already installed, install the latest version of Microsoft Visual C++ 2015 Redistributable.
- Obtain PC Software Suite from THine Solutions.
- Extract package contents into a directory which the application will run from and launch the host application.
- In the host application, under the Devices menu select the Vby1MIPI camera.
- Observe video from the camera in the Vby1Viewer application window.
How to Start FAKRA Configuration
- Connect Image Output Board to FAKRA Near-End Board.
- Connect FAKRA Far End Board to Camera Board to VSSK Camera.
- Connect FAKRA cable From the Far End board to the Near End Board.
- Configure DIP switches on the Camera Board and the Image Output Board as shown on the diagram.
- Connect the USB3.0 cable from the Image Output Board to the Host PC. In Windows Device Manager this device will appear under a list of Imaging Devices.
- If not already installed, install the latest version of Microsoft Visual C++ 2015 Redistributable.
- Obtain PC Software Suite from THine Solutions.
- Extract package contents into a directory which the application will run from and launch the host application.
- In the host application, under the Devices menu select the Vby1MIPI camera.
- Observe video from the camera in the Vby1Viewer application window.
www.thinesolutions.com | © THine Solutions, Inc. All rights reserved | inquiries@thinesolutions.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>