Shenzhen Hdcvt Technology HDC-E5100W HDMI Wireless Extender User Manual
- June 5, 2024
- Shenzhen Hdcvt Technology
Table of Contents
Shenzhen Hdcvt Technology HDC-E5100W HDMI Wireless Extender
Introduction
This product is based on H.265 standard solution for transmitting one HD
source signal to one HD display. It extends distance up to 330ft/100 meters
(In an open environment without Wi-Fi interference) between the encoder and
decoder via wireless transmission. It supports one-way IR control. It offers
high quality configurable and low-bandwidth H.265 compression video. Input
video resolution is up to 1920×1080@60Hz; Output video resolution is up to
1080P@60Hz. This wireless extender is designed specially to transmit high-
definition video & audio within one environment.
Features
- HDMI 1.3, HDCP 1.4 and DVI 1.0 compliant
- Transmit one HDMI HD source signal to one HDMI HD display via wireless technology
- With one-way IR control
- Input video resolution is up to 1920×1080@60Hz YCbCr 4:4:4; Output video resolution is up to 1080P@60Hz YCbCr 4:4:4
- HDMI wireless transmission distance up to 330ft/100m. (In an open environment without Wi-Fi interference.)
- Supported HDMI audio formats:
- Input: LPCM 2.0CH 32KHz/44.1KHz/48KHz/88.2KHz/96KHz/176.4KHz/ 192KHz
- Output: LPCM 2.0CH 48KHz
- Adopt H.265 high performance codec technology
- End-to-end delay is less than 120Ms
- Compact design for easy and flexible installation.
Package Contents
| Qty | Item |
|---|---|
| 1 | HDMI Wireless Extender (Encoder) |
| 1 | HDMI Wireless Extender (Decoder) |
| 1 | IR Blaster cable (1.5 meters) |
| 1 | 20~60KHz IR Receiver cable (1.5 meters) |
| 4 | 5G WiFi Antenna |
| 2 | 5V/2A Multi-country Power Supply |
| 1 | User Manual |
Specifications
Technical
HDMI Compliance| HDMI 1.3
HDCP Compliance| HDCP 1.4
Video Bandwidth| 6.75Gbps
Video Resolution| Input: Up to 1920×1080@60Hz Output: Up to 1080P@60Hz
Color Space| RGB, YCbCr 4:4:4 / 4:2:2
Color Depth| 8/10/12-bit (1080P@60Hz)
HDMI Audio Formats
| Input: LPCM 2.0CH 32KHz/44.1KHz/48KHz/ 88.2KHz/96KHz/176.4KHz/192KHz
Output: LPCM 2.0CH 48KHz
ESD Protection| Human body model — ±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Connection
Encoder
| Inputs: 1x HDMI IN [Type A, 19-pin female] Outputs: 1x IR OUT [3.5mm Stereo Mini-jack]
2x WiFi OUT [WiFi antenna]
Control: 1x SERVICE [Micro USB, Update port]
Decoder
| Inputs: 1x IR IN [3.5mm Stereo Mini-jack] 2x WiFi IN [WiFi antenna]
Outputs: 1x HDMI OUT [Type A, 19-pin female] Control: 1x SERVICE [Micro USB, Update port]
Mechanical
Housing| Plastic Enclosure
Color| Black
Dimensions| Encoder / Decoder:
76mm [W] x 98mm [D] x 21mm [H]
Weight| Encoder / Decoder: 100g
Power Supply| Input: AC100 – 240V 50/60Hz
Output: DC 5V/2A
Power Consumption| Encoder: 5.6W, Decoder: 2.65W (Max)
Operating Temperature| 32 – 104°F / 0 – 40°C
| Storage Temperature | -4 – 140°F / -20 – 60°C |
|---|---|
| Relative Humidity | 20 – 90% RH (no condensation) |
| Resolution / Cable Length | 1080P60Hz – |
Feet / Meters
HDMI IN / OUT| 42ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.
Operation Controls and Functions
Encoder Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | The LED will illuminate red when the encoder is powered on. |
2
| LINK LED
(Green)
| The LINK LED flashing means that the encoder and decoder are paired
successfully. (Please refer to “5.3 Pairing Instruction” for details)
3| HDMI IN| HDMI source input port for connecting the HDMI source device.
4| DC 5V| Connect the DC 5V/2A power adapter.
5| PAIR button| Press and hold the PAIR button, then power on the encoder, the
device will enter the upgrade mode.
6| SERVICE port| Firmware update port.
7| IR OUT| Connect the IR blaster cable. The IR blaster signal is from the IR
IN port on the Decoder.
8| Antenna port| Connect the WiFi antenna.
Decoder Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | The LED will illuminate red when the decoder is powered on. |
2
| LINK LED
(Green)
| The LINK LED flashing means that the encoder and decoder are transmitting
video signals. (Please refer to “5.3 Pairing Instruction” for details)
3| HDMI OUT| HDMI output port for connecting the HDMI display device.
4| DC 5V| Connect the DC 5V/1A power adapter.
5| PAIR button| Press and hold the PAIR button, then power on the decoder, the
device will enter the upgrade mode.
6| SERVICE port| Firmware update port.
7| IR IN| Connect the IR receiver cable. The IR signal is sent to the IR OUT
port on the encoder.
8| Antenna port| Connect the WiFi antenna.
Pairing Instruction
Connect the encoder and decoder with an HDMI cable. Power on the decoder
firstly, then power on the encoder after the power LED and LINK LED of the
decoder are always on. After successful pairing, the LINK LED of the decoder
will flash. If the LINK LED of encoder is always on, it indicates that the
encoder and decoder has not been connected or paired. When there is video
signal transmission, the LINK LED of decoder will flash; When there is no
video signal transmission, the LINK LED of decoder will be always on.
Encoder’s LINK LED status (Green)| Decoder’s LINK LED status
(Green)| Description
---|---|---
Always on| Always on| The encoder and decoder are not paired or
connected.
Flash| Always on| Successful pairing.
Flash
|
Flash
| The encoder and decoder are paired successfully, and there is video signal transmission.
IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
Connection diagram of using IR cables.
Application Example
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: this device may not cause harmful inlcrfercncc,
and this device must accept any interference received, including interference
that may cause undesired operation. changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with, the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits arc designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, ifnol installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can he determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Lncrea.sc the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from 1ha1 to which 1he receiver is connected.
- Consult the dealer or an experienced radioffV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated witl1 a minimum distance of m the radiator
your body. This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>