Rowenta CF7112 Hair Straightener Instruction Manual

Rowenta CF7112 Hair Straightener

GENERAL DESCRIPTION

1. A. Straighteners
2. B. ‘Power on’ light
3. C. On/off the keypad
4. D. Thermostat
5. E. Ceramic straightening plates
6. F. Power cord
7. G. Hanging loop

SAFETY PRECAUTIONS

• The appliance’s accessories become very hot during use. Avoid contact with the skin. Make sure that the supply cord never comes into contact with the hot parts of the appliance.
  For your safety, this appliance complies with the applicable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility, Environmental…).

• The appliance must be unplugged:

  • before cleaning and maintenance procedures.
  • if it is not working correctly
  • as soon as you have finished using it
  • if you leave the room, even momentarily.

• Check that the voltage of your electricity supply matches the voltage of your appliance. Any error when connecting the appliance can cause irreparable harm, not covered by the guarantee.

• As an additional safety measure, we recommend the installation of a residual current difference device in the electrical circuit supplying the bathroom, acting at not more than 30 mA. Ask your installer for advice.

• Caution: Never use the appliance with wet hands or near baths, basins or other recipients containing water.

• When using the appliance in the bathroom, unplug it after use as the presence of water nearby may pose a danger even when the appliance is turned off.

• Close supervision is necessary when the appliance is used on or in the presence of children or disabled people.

• If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service or a person with similar qualifications, to avoid all danger.

• Stop using your appliance and contact an Authorised Service Centre if:

  • your appliance has fallen
  • it does not work correctly.

• If your appliance is not working correctly, see “Troubleshooting”, or contact our Customer Helpdesk or your dealer.

• Do not leave within the reach of children.

• Do not use if the cord is damaged.

• Do not immerse or put under running water, even for cleaning purposes.

• Do not hold with damp hands.

• Do not hold the appliance by the casing, which is hot, but by the handle.

• Do not unplug by pulling on the cord, rather pull out by the plug.

• Do not use an electrical extension lead.

• Do not clean with abrasive or corrosive products.

• Do not use at temperatures below 0°C and above 35°C.

GUARANTEE
Your appliance is designed for use in the home only It should not be used for professional purposes. The guarantee becomes null and void in the case of improper usage.

GETTING STARTED

Your appliance heats up very quickly (only 60 seconds), and the temperature remains constant throughout use:

• Plug in the appliance
• Set the on/off switch to “1” (Fig.1-C)
• Wait 60 sec.; the appliance is ready for use (Fig. 2)
• Select the ideal temperature for your hair using the Thermostat (Fig.1-D)
• After use, unplug the appliance and let it cool down completely before storing it away.

OPERATION

Use this product on clean, untangled, dry (or slightly damp) hair.

• Do not use the straighteners on synthetic hair (wigs, extensions, etc.).
• Take a small section of hair, a few centimetres in width, comb it and place it between the plates. Grip the hair firmly between the plates and slowly slide the appliance from the roots to the tips of the hair (Fig. 3)
• If your hair is very thick or frizzy, you can improve the result by spraying your hair with water before straightening.
• The ceramic plates protect your hair from excessive heat, thanks to an even distribution of the heat.
• Wait until your straightened hair has cooled down before styling (fig. 4).

PROFESSIONAL TIPS

• Always start with the layers of hair underneath: first those at the nape, working around to the sides then the front.
• To avoid kinks in long sections of hair, use a fluid, continuous movement.
• To enhance the effect, you can apply styling mousse before straightening.

CLEANING

CAUTION! Always unplug your straighteners and let them cool down before cleaning them.

• Never submerge the straighteners in water.
• To clean the straighteners, unplug them, let them cool down then wipe with a damp cloth and dry with a dry cloth (fig. 5).

ENVIRONNEMENT PROTECTION FIRST!

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a collection point.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>