TIANYU MP45 Mobile Payment Terminal Instructions
- June 5, 2024
- TIANYU
Table of Contents
MP45 Mobile Payment Terminal
Instruction Manual
INTRODUCTION
There are one device, instruction, and one power /data cable in the package.
••• The actual components may differ slightly from the instruction due to product updates.
DEVICE LAYOUT
EMV contactless symbol is printed on the back of the device.
POWER CHARGING
The device uses a built-in lithium battery. When charging, the red charging
status light is always on. When the battery is fully charged, the red charging
status light starts to flash. The capacity is 250mAh and the single charge
time is 2 to 3 hours.
POWER ON/OFF
Press the power button for one second to turn on the device and the self-
check information of the device will be displayed during this time. The device
can only be used after the main window appears on the screen.
If there is no operation for 30 seconds, the device will enter sleep mode and
could waken up by tapping the power button or issuing transaction commands by
the mobile client. The device will automatically shut down after no operation
for 30 minutes.
COLLECTION
IMPORTANT
- Please check the network connection status before opening the mobile client.
- When using a magnetic stripe card, please swipe the card at a constant speed and stability.
- When using an IC card, please do not pull out the card during the transaction otherwise the transaction will fail.
- Do not use the device in moist, extremely cold, or hot environments.
- Please turn off the device before cleaning and use a dry cloth to clean the device.
- If any abnormality occurs, please hand the device to authorized professionals in time and do not maintain the device by yourself
CERTIFICATE OF QUALITY
Inspector:
Date:
TRANSACTION
The cashier needs to verify the card account after swiping the card. After the
verification is correct. the cardholder confirms the amount and then enters
the password for the transaction. If the password is entered incorrectly,
press the clear key(the yellow key) to re-enter.
E-SIGNATURE
Receipt generation after transaction complete 
WARRANTY & STATEMENTS
Dear customer
Within one year from the date of purchase, if the product has quality problems
during normal use within the scope of specification and operation manual of
this device, the company will provide free maintenance based on this warranty
card and the purchase invoice.
The Company does not assume responsibilities for the following actions:
- Problems caused by use and maintenance without complying with the conditions specified in this guide;
- Problems caused by repair, modification, and disassembly by unauthorized personnel;
- Problems caused by accidents caused by the user’s own transportation, such as falling, collision, shock, and water ingress;
- Problems caused by improper voltage, environmental pollution, and natural disasters such as fire, earthquake, flood, thunder, and lightning;
- Problems caused by improper maintenance and storage such as placing the device in an extremely hot, high humidity, toxic or corrosive environment;
- This warranty card is not presented with the purchase invoice and the device together, or the warranty card is inconsistent with the device serial number;
- The information on the warranty card has been changed, such as the date of purchase, the name of the seller, and the machine serial number;
- The device is not purchased from authorized distributors.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
the manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.