SPV W01 Power Wireless Charger Instructions
- June 3, 2024
- SPV
Table of Contents
POWER
WIRELESS CHARGING
INSTRUCTIONS FOR USE
Product Parameters
- W01
- CD (2 TYPE-c cable
- A: TYPE-C magnetic interface
B: Micromagnetic interface
Power supply voltage: DC, QC, PD 9V /3A.
(Note: the charging adapter must support 9V / 2A output)
Power supply interface: type-C interface.
Output power: wireless charging max. 15W, magnetic suction charging max. 5V/
1.0A.
Transmission frequency: 115k-205khz.
Wireless distance: 5mm (max), 2-3mm recommended.
Coil type: a11 wireless charging and transmitting coil.
Conversion efficiency: 70% – 85% (depending on receiver coupling matching).
Protection function: input overvoltage, Undervoltage, overcurrent protection,
DC 5V Output short circuit protection.
Working temperature and humidity: 0C-75 “C, 1 0-85%.
Storage temperature and humidity: – 40C – 85 C, 95%.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
After-Sale Service
service@spvapor.com
Brand: Shenzhen SPVTrading Co., Ltd
Address Romm 1401, Building 1, Phase 2, Gaoxinqi Technology Park, Xin An St
Bao An District, Shenzhen City
Manufacturer: Shenzhen SPV Trading Co.Ltd
Address Romm 1401, Building 1, Phase 2, Gaoxinqi Technology Park, Xin An St
Bao An District, Shenzhen City