DIGITEL Newel 3 Energy Metering User Manual
- June 5, 2024
- DIGITEL
Table of Contents
DIGITEL Newel 3 Energy Metering
User Manual
Digital reserves the right to modify the technical characteristics
described without prior notice.
Non-contractual document
Digitel SA
All rights reserved
ENERGY METERING
ENERGY COUNTER N43
Energy metering can be performed using the N43 meters. They must be connected
to one of the communication buses according to the diagram below. They measure
all important parameters of the network these values, recorded in the central
unit, allow a detailed analysis of the consumption, creation of statistical
estimation of the operating costs, etc …
The communication parameters of the N43 counter must be programmed as follows:
[Adr] – 1 à 31 (address – value between 1 and 31 unique for each module)
[trb] – r8n1
[bAU] – 19.2k
IMPULSE COUNTER
The diagram below shows the measurement of energy consumption using a pulse
counter.