LEDEXPERT E1-B Hand Sweep Sensor Switch Instructions
- June 5, 2024
- LEDEXPERT
Table of Contents
Hand Sweep Sensor Switch
Model No.: E1-B
Hand sweep sensor/DC12-24V/4A output/Aluminum profile installation
Features
-
Hand sweep sensor switch, connected directly to the low voltage LED strip.
-
When hand swept, the strip turns on gradually.
When the hand sweep again, the strip turns off gradually. -
Max 4A output current, max output power 96W@24V.
-
Generally installed in the aluminum lamp strip housing.
-
3M paste in the bottom of the PCBA makes easy installation and security.
-
Low cost and high stability.
-
Widely used in table lamps, bedroom lamps, wardrobe lights, etc.
Technical Parameters
Input and Output
| Input voltage | 12-24VDC |
|---|---|
| Output voltage | 12-24VDC |
| Output power | Max. 48W@12V |
Max. 96W@24V
Sensor data
| Detective distance | ⩽8cm |
|---|---|
| Detective angle | 15-30 |
Environment
| Operation temperature | Ta: -30 ºC ~ +55 ºC |
|---|
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD
Warranty and Protection
| Warranty | 5 years |
|---|---|
| Protection | Reverse Polarity |
Dimension
Installation attention
- Cut a hole in size L7 x H5mm on the PC cover.
- Put mini sensor switch into profiles when power is off, put the detector head to the hole.
- Pay attention to power input and LED output polarity.
Wiring Diagram
E1-B Hand Sweep Sensor Switch