Jazmm

Jazmm AM FM Portable Radio Personal Radio with Excellent Reception

Thank you for purchasing our products. Please read this manual carefully before using this product. If you encounter any difficulties or problems during use, please contact us for further assistance

Display Functions

6. Whip antenna
7. Time setting/Timing switch/alarm clock setting
8. Memory+
9. Memory
10. Lock/ Stereo button
11. Earphone iack

Warranty

• This radio has full 12 months warranty against manufacturing defects.
• The warranty period begins from the date of purchase.

Battery instruction

1. Press and hold the battery cover to push it back to open the battery compartment, and insert 2 “AAA” batteries into the battery compartment according to the polarity direction shown in the battery compartment.Then close the battery cover
2. Battery indicator reference:

Kindly Remind:

1. The battery is low when the radio is with low voltage, blurred display, low volume, distortion or automatic shutdown. In this case, please replace the batteries timely.
2. Please do not allowed to mix new and old batteries or those with different types for use.
3. To prevent bursting. never charge, heat, or disassemble the dry batteries. leakage of the electrolyte or
4. When the batteries are not in use for a long time, please take them out to prevent the components inside from being damaged due to leakage of electrolyte.

Time setting

• In the time display, the alarm clock symbol should not displayed. If any, short press the button to disable it. Long press the button for 2 seconds until the “24Hr/12Hr characterflashes on the screen.
• Press the button to select 24Hr/12H mode. The time will be displayed in a.m. (am) and p.m. (pm) under the 12Hr mode.
• Press the button to flash the time in hour, and then press the button to adjust the time in hour.
• Press the button to flash the time in minute, and theñ press the button to adjust the time in minute.
• Press the ” button to confirm and save the time setting.

Alarm clock setting

• In the time display, short press the button to enable the alarm clock, with the ālarm clock symbol displayed on the screen.
• Long press the “” button for 2 seconds to flash the time in hour, and then press the button to adjust the time in hour.
• Press the button to flash the time in minute, and then press the ” UNNG button to adjust the time in minute.
• Press the button to confirm and save the time setting.

Snooze of alarm clock

1. The alarm clock will snooze automatically in 2 minutes of continuous playing without any button operation after the alarm rings, which will close automatically after 6 cycles.
2. After the alarm clock rings and press once the button, the alarm clock character “SNOOZE” on the display flashes, indicating that it has entered the snooze; the snooze interval is 5 minutes. It will ring again in 5 minutes and then snooze for cycles.
3. To close the alarm clock, press any button (except for the TUNINO button).

Turn on/off Radio

• Short press the button to turn on the radio and will display the band frequency before the last turn off.
• When you have finished the listening, press once the button and the LCD screen displays the current time.
  Note: In radio state, long press the button for 2 seconds to enter the sleep mode.

Radio operation

• Press the button to turn on the radio, select FM/AM with “e” button. Extend the antenna to get better signal reception, especially listening to the FM radio

Auto scan & stored stations

• In radio state, press band to select the FM/ AM band.
• Long press the button for 2 seconds and release it, then the radio will start to scan the station automatically. When a station is received, it can be automatically stored in the memory space. Total 20 storage spaces for the AM/FM band (P01-20).
• After finished of the scanning, press the button to call up the stations in the memory space (P01-20).

Tune the stations

1. Short press the button to call up the stations (P01-20) in the memory space.
2. Long press the button for 2 seconds and then release it, then the stations will be searched automatically. The search is completed after the stations are received.

Manually store the stations

• Press the button to turn on the radio.
• Press select the FM/AM band.
• Press the button to tune to a favorite station frequency.
• Press the ” button to flash the storage space address (P-) and the character (PRESET)
• Press the arrow button to select the location of the memory space you desire.
• Press the button to confirm and save the settings.

Adjust the volume

Press the “V+” button to increase the volume while press the “V” button to decrease in the radio-on state. The display shows the current volume level. Range of volume levels: “V00-V38

Earphone Jack

This radio is designed with an “EARPHONE” port. To avoid affecting others, just insert the earphone to its jack.
Note: In the weather alert mode, please unplug the earphones for receiving the weather alert information.

Backlight

The buttons on the control panel are all provided with backlight switches. Press any button to turn on the backlight inside the display. It will facilitate the operation in a dark environment and could automatically turn off after 10 seconds.

Note:

1. The backlight will not work after pressing any button on the control panel in the locked state (except for the Lock button).
2. When the battery voltage is as low as 2.5V or lower, the backlight will flash when turning up the volume of the radio. The volume should be turned down appropriately to extend the service life of the batteries.

Sleep Timer

• This radio is designed with a function of automatic timed shutdown in sleep. When enabled before going to bed, it will automatically shut down at the set time, so as to avoid power consumption for a long time.
• In the radio state, long press the sleep off button to enter the sleep setting. Then, the display shows the sleep indication and the shutdown time “90”.
• Short press button to adjust the sleep off time. (Unit: minute)-90-60-45-30-15-10
•  After adjusting the shutdown time, press the O button to confirm and save the sleep time, the
• The radio will automatically shut down on the set sleep off time. If any need of shutdown in advance, just press the UU” button.

Use the antenna

1. When listening to the FM broadcasts, this radio uses a whip antenna to receive the FM radio signals. Before listening, please pull out the whip antenna and change its length and direction for best reception of signals.
2. When listening to the AM broadcast, this radio receives the medium wave signals with its built in magnetic antenna with high Directionality. So for listening, please rotate the radio to get the best reception of signals.

Note: The broadcast signals inside buildings with the steel structure and the high-rise buildings will be shielded to some extent. It is recommended to use the radio near the window to mprove the listening effect.

Low battery protection

This radio is designed with the low-voltage shutdown function. When the voltage is as low as 2.1V during the playing, it will stop playing and return to the state only with the time displayed. Purpose of the “low-voltage shutdown”:

1. Prevent the batteries from running out and causing no display of the time.
2. Keep the clock running, leaving no need in time setting after replacement of the batteries. Note: Turning down the volume or listening with the earphone could extend the service life of the batteries.

Technical Indicators

1. Frequency range
   FM: 87.5-108MHZ
   AM: 520-1710 kHz

2. Noise-imited sensitivity:
   FM: 30dB, higher than 6yV in the noise-limited sensitivity
   AM: 20dB, higher than 3mV in the noise-limited sensitivity
   WB: 30dB, higher than 6uV in the noise-limited sensitivity

3. Signal to noise ratio:
   FM: 98MHz245dBy
   AM: 990KHz240dBu

4. Max. current consumption: s150mA

5. Max. output power: 2 90mW

6. Max. distortion: s5%

7. Loudspeaker specification: ¢30MM 120 0.5W

8. Input voltage: DC-3V (AAA^2)

9. Overall dimension: 16.2 X 55.9 X 109mm

10. Net weight: 65g

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>