METALLIC GEAR Neo V2 Series Mini-ITX Case User Guide
- June 3, 2024
- METALLIC GEAR
Table of Contents
Neo V2 Series
Quick Guide
Heating On / Temperature Control
To make a temporary change to the temperature setting press the V or /\. key,
set your desired temperature, and press ✓
If the set temperature is above the room temperature the” symbol will be
displayed, indicating the heating is now on.
This set temperature will be maintained until the next comfort level.
Heating Off/ Frost Protection
To enable frost protection, use the < > keys to select C) then press the ✓ key
once. The symbol will be displayed.
In this mode, the heating will be turned off, but if the temperature falls
below your frost protection temperature, the heating will then turn on.
To return to your heating schedule, disable frost protection by using the < >
keys to select C) then press ✓, the symbol will disappear.
Heating on
Frost Protection On
Setting The Clock
Use the < > keys to select C) then press and hold the ✓ key. Use the > key to
select CLOCK, and press the ✓ key.
Use the v /\ keys to set the year, and press ✓
Repeat the steps to set the month, day, hours & minutes.
Use the V key to select C), and press the ✓ key to turn the display on.
Note: The clock will automatically be set when paired to the neoHub.
Editing Comfort Levels
Use the < > keys to select EDIT, and press the ✓ key once.
Use the < > keys to select the days to edit, press ✓
WAKE will now flash, press the ✓ key to edit the WAKE level. Use the V /\ keys
to adjust the hours, press ✓
Use the V /\ keys to adjust the minutes, and press ✓
Use the v /\ keys to adjust the temperature, press ✓
Use the< > keys to select LEAVE, press✓
Repeat the steps above for the Leave, Return & Sleep settings.
For any levels that you don’t want to use, adjust the time to–:-To confirm
changes and exit, use < > to select DONE, press ✓
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>