Airvital CO2 Monitor Instruction Manual

: June 5, 2024
: Airvital

Table of Contents

Product Description
Data visualization
Trend visualization
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CO2 Monitor Instruction Manual Customer service: contact@airvital.eu

Product Description

This product is an air quality monitor to measure carbon dioxide (CO2), temperature, and air humidity.

Precautions

Do not cover the vents on the side and back of the product. It will result in inaccurate measurements.
Do not use cleaning detergents on the monitor.
Do not use water or other liquids near the monitor.
Do not open or modify the monitor.

Switch screen button
Display
On-off switch
Temperature and humidity sensor
Air vent
USB charging port

Data visualization

On the main display, you can see the temperature, humidity, and carbon dioxide.

Airvital CO2 Monitor - Data visualization

Temperature indication in Celsius
Relative humidity in %
Carbon dioxide (CO2) in PPM

Trend visualization

When you press the switch screen button, you can see the trend display where you can see the CO2 values for the past 8 hours.

Airvital CO2 Monitor - Trend visualization

Color Indication for CO2 levels
The CO2 values on the display will change in color depending on the carbon dioxide concentrations.

CO2 Air Quality

Charging
During charging, the temperature sensor can be influenced. We recommend leaving the device plugged in for more accurate temperature measurements. Use the included charger to charge the device. The standby time is 6 hours. Charging takes 2 hours.

Calibration
Rough handling, transportation, and aging can have an impact on the sensor’s accuracy.
The sensor is equipped with a self-calibrating algorithm called ‘automatic baseline correction’. This algorithm will auto-calibrate to the lowest CO2 readings it sees in a time span of several weeks. By placing the monitor outside, the sensor will sense this and recalibrate over time.
The device has been calibrated in the factory but because of transportation and different air pressure, we recommend placing the product outside for 10 minutes after you have received it. This will auto-calibrate the sensor.
Normal outdoor CO2 readings are around 410PPM.

Specifications

CO2 sensor

Measuring range: 0-9999 PPM
Sensor for CO2: Infrared (NDIR)
Resolution: 1 PPM
Accuracy: ±50ppm ±5%
Response time: 30 seconds
Allow two minutes for accurate CO2 measurements after startup.
Life expectancy: 15+ years

Temperature and humidity sensor

Temperature range: -40 to 90 ° C
Measuring accuracy: ±2 ° C
Humidity range: 0% to 100% RH
Measurement accuracy: ±5% RH
Allow two minutes for accurate measurements after startup.

Find us online :
• https://airvital.eu
Is something wrong or is the product not what you thought it was? Contact customer service :
• contact@airvital.eu
Chat with us on Facebook :
• https://airvital.eu/facebook