Trust GXT 188 Laban RGB Gaming Mouse User Manual
- June 5, 2024
- Trust
Table of Contents
Trust GXT 188 Laban RGB Gaming Mouse
INSTRUCTIONS
Report rate & DPI settings
DPI setting
- Click on the ‘PERFORMANCE’ tab.
- Click on the checkbox next to the DPI number to enable or disable this DPI level.
- Change the DPI level by dragging the respective bar.
- Click on ‘Apply’, the mouse is being updated.
LED colours indicate which DPI level is currently These indication colours cannot be changed:
- GREEN = Level 1
- RED = Level 2
- BLUE = Level 3
- TURQUOISE = Level 4
- PURPLE = Level 5
Other Settings
- Click on the ‘BUTTON’ tab.
- Change the Acceleration, Windows pointer speed, Windows scroll speed or Windows double-click speed by dragging the respective cursor.
- Change the Polling rate by clicking on the respective frequency.
- Click on ‘Apply’, the mouse is being updated.
Light Settings
Change the Light Effect
- Click on the ‘EFFECT’ tab.
- Change the light mode.
- Change the colour by clicking the color box or;
- Change the colour by dragging the Red, Green or Blue cursor.
- Change the LED brightness level.
- Change the animation speed.
- Change the wave direction.
- Click on ‘Apply’, the mouse is being updated.
Light modes
- 7 Color Breath
- Full lighted
- LED Off
- Breathing
- Wave
- multiple colours breathing = one solid colour
- disable LED
- one breathing colour
- Rainbow wave effects
Macro Settings
Create a Macro (Store a sequence of keys in the software)
- Go to the ‘BUTTON’ tab.
- Click on a button and then on ‘MACRO MANAGER’.
- Click on ‘NEW’ to create a new macro.
- Fill in the name of the macro and click on ‘OK’.
- Set the delay time between each action and/or the loop/repeat setting.
- Click to start recording the macro. Now enter your preferred macro sequence.
- Click to stop recording the macro. (max. 60 actions)
- Click ‘OK’ to return to the ‘BUTTON’ tab.
- The created macro is now available under the ‘MACRO’ function.
- To assign a macro follow step 3 of this manual.
Profile Settings
Select, Save or Load a profile
- Select one of the 5 profiles by clicking on the preferred profile.
- Click on ‘SAVE AS’ to save a setup, Click on ‘LOAD FILE’ to load a setup.
- Enter a name for the mouse setup you want to save, or choose the preferred profile to load.
- Click on ‘Save’ to save the setup, click on ‘Open’ to load the setup.
- Click on Apply Your mouse setup is now saved or updated to your mouse.
Restore default settings
- Click on ‘RESTORE’ to reset the current profile to factory default.
- Click on ‘RESET ALL’ to reset all profiles to factory default.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>