Enkarl Q08 Selfie Stick Tripod Instructions
- June 5, 2024
- Enkarl
Table of Contents
Enkarl Q08 Selfie Stick Tripod
Unload and load
Taking out and loading the Selfie
Replacement battery
Pull out from the groove on the left to open the remote control cover.
How to use
- Turn on: Long press the camera button for 3 seconds to turn on.
- Bluetooth pairing: the indicator light flashes for 4 seconds to enter the pairing state, the blue indicator light of the pairing state flashes, use the mobile phone to search for “Gimbal Selfie”to match, and the blue indicator light will go out after the pairing is successful.
- Take a photo: When the Selfie is connected to the mobile phone, short press the camera button and the bluee light flashes.
- No pairing: After booting, in the state of no pairing connection, it will automatically shut down after 5 minutes of no operation.
- Pairing: After turning on the phone, when the Selfie is connected to the phone, it will enter the dormant state if there is no operation for 10 minutes, and it will automatically shut down after another 10 minutes.
- Power off: In power on and sleep mode, press and hold the camera button for 3 seconds to power off, the indicator light flashes and goes out.
Open the tripod
Open outwards at the bottom of the handle, Change into a tripod in seconds.
How to use PTZ
- Clamp the phone and maintain a natural balance Long press the PTZ power button for 5 seconds to turn on, Long press for 3 seconds to shut down.
- After booting, the green light flashes to enter Steady shooting mode, shake the handle left and right, The pan/tilt always keeps the same horizontal direction.
- Click the power button of the gimbal stand,Horizontal and vertical shooting Manually dial left (right) more than 45 For 2 seconds, The pan/tilt automatically rotates 90° to the left (right).
Selfie stick mode
When the gimbal is dead or turned off, slide the unlock button to Change to tripod mode.
When the power of the gimbal is low, there will be a flashing red light to remind you that you need to use the Micro USB port to charge at this time, the red light will be be on during the charging process, and the red light will go out after the charging is completed.
Remind
The selfie stick is compatible with Android 4.2.2, Android devices and 1OS 5.0
or above of iPhone (if you change the”volume key” function of the system under
the camera option of mobile phone, you must change it to the default, or”take
photos” to make the selfie stick work normally) When clamping the phone, it
must be pressed against the phone clip.
- Stable Mode: Best use in 3 telescopic rods (within 50cm)
- Selfie Stcik Tripod Mode:5 telescopic rods are recommended(within 70cm)
(The battery must not be exposed to such as sunlight, fire or similar overheating envir onment)