evatronic ET-BA007 Wireless 2-in-1 Adapter User Manual
- June 5, 2024
- evatronic
Table of Contents
evatronic ET-BA007 Wireless 2-in-1 Adapter User Manual
Package Contents
- 1 x Wireless Adapter
- 1 x 3.5mm Audio Cable
- 1 x 3.5mm Female to RCA Male Cable
- 1 x USB Charging Cable
- 1 x Optical Cable
- 1 x User Manual
Product Diagram
- Power Button
- Indicators
- Pairing Button
- Transmitter (TX) / Receiver (RX) Mode Switch
- Charging Port
- Optical Audio Output Port (RX Mode)
- Optical Audio Input Port (TX Mode)
- 3.5mm Audio Port
Control Functions
Indicators
How to Use
Charging
- Charge the adapter via a DC 5V USB charging cable.
- will stay solid on during charging. Once fully charged, it will turn off.
Note: We recommend charging the unit for at least 2 hours before using it for the first time.
Use in RX Mode
Pair with the 1st Bluetooth® Device
- Slide the Mode switch to “RX” mode and connect the adapter to your non-Bluetooth audio receiving device.
- Turn on the adapter and press the Pairing Button once to enter pairing mode, and the indicator “RX” will flash quickly.
- Activate the Bluetooth® function on your phone/tablet, find “ET-BA007” in the search results and tap to connect (enter the password “0000” if needed). Once connected, the indicator “A” will turn solid on.
Pair with the 2nd Bluetooth® Device
- After connecting with the 1st Bluetooth® device, press the Pairing Button once, and the indicator “RX” will flash quickly.
- Activate the Bluetooth® function on your 2nd phone/ tablet, find “ET-BA007” in the search results and tap to connect. Once connected, the indicator “B” will turn solid on.
Note:
- The adapter will enter pairing mode automatically when powered on for the first time.
- The adapter can remember the devices paired previously, and will attempt to pair with the last connected devices (up to 2 devices) automatically once it is turned on.
- Make sure your optical cable is plugged in SPDIF OUT/AUX port in RX mode.
Use in TX Mode
Pair with the 1st Bluetooth® Device
- Slide the Mode switch to “TX” mode and connect the adapter to your non-Bluetooth audio transmitting device.
- Turn on the adapter and press the Pairing Button once to enter pairing mode, and the indicator “TX” will flash quickly.
- Turn on and place your Bluetooth audio receiving device, like earphones or speakers, within a 3 feet / 1 meter range and pairing will be completed automatically. Once successfully paired, the indicator “A” will turn solid on, and the Codec indicator for the current streaming codec will light up.
Note: The default input mode is SPDIF. When the AUX cable is plugged in, it will switch to AUX mode automatically.
Pair with the 2nd Bluetooth® Device
- After connecting with the 1st Bluetooth® device, press the Pairing Button once, and the indicator “TX” will flash quickly.
- Turn on and place your 2nd Bluetooth® device close to the adapter (within 3 feet / 1 meter) and pairing will be completed automatically. Once successfully paired, the indicator “B” will turn solid on, and the Codec indicator for the current streaming codec will light up.
Note:
- After connecting with two Bluetooth® devices, the Codec indicator for the lowest codec supported by both devices will light up.
- After disconnecting with one of the devices, the Codec indicator for the highest codec supported by the remaining device will stay on.
- Make sure your optical cable is plugged in SPDIF IN port/AUX in TX mode.
Additional Features
Automatic Power Off
If the adapter is not connected to any devices, it will automatically power
off in 10 minutes. In Bluetooth connection state, if it exceeds the effective
Bluetooth range, it will disconnect and automatically power off in 10minutes.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is under license. Other trademarks and trade names are those of their respective owners.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems) This marking on the
product, accessories or literature indicates that the product and its
electronic accessories should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
Questions or Concerns?
support@evatronic.co