Hisense H40A5600F 40 Inch Full HD LED TV User Guide

Hisense H40A5600F 40 Inch Full HD LED TV

Important Safety Precautions

This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. This symbol alerts user about the presence of important operating instructions and maintenance in the document enclosed in the package.Do not open the back cover. In no case the user is allowed to operate inside the TV set. Only a qualified technician is entitled to operate.Class II product: This symbol indicates that it does not require a safety connection of protective earthing (ground). AC voltage: This symbol indicates that the rated voltage marked with the symbol is AC voltage.

Disposal of Used Electrical & Electronic Equipment

Packaging and electrical goods should be recycled appropriately, and not treated as household waste. Please dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipment waste. By ensuring the correct disposal of this product, you will help prevent potentially hazardous to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural resources. Please do not therefore dispose of your old electrical and electronic equipment with your household waste. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Accessories List

The following accessories are included with TV:

• Quick Setup Guide × 1
• Base Stand × 2 AAA
• Battery × 2 Screw × 4
• Remote Control × 1

The accessories may be different from the list above due to different models, countries/regions, please refer to the actual accessory bag.

Installing the Stand or Wall Mount Bracket

CAUTION

• Be sure to disconnect the AC power cord before installing a stand or wall mount brackets.
• The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure.
• After the installation is complete, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.

Installing the Stand
Follow the illustrations and textual instructions below to complete the installation steps:

1.  Carefully place your TV facedown on a soft, flat surface to prevent damage to the TV or scratching to the screen.
2.  Take out the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.
3.  Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.

Installing the Wall Mount Bracket
Before mounting the TV, remove the TV stand if you have already attached it, and make sure the wall mount bracket supports the weight of your TV.

CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury.

• Place spacers between the TV and bracket.
• Make sure the tilt angle between the TV screen and the vertical surface is no more than 15 degrees.
• Standard dimensions are shown below.

NOTE

• The diameter and length of the screws differ depending on the wall mount bracket model.
• Wall mount bracket is optional. Your TV may not have wall mount bracket. Please refer to the actual accessories.

TV Front

Remote sensor

| Receive remote signals from the remote control.

Do not put anything near the sensor, as its function may be affected.

Power indicator| The light is red in standby mode.

Standby

|

Press the button to turn on / off the TV.

NOTE

• The Picture is Only for Reference.
• Powering on the TV requires several seconds to load programs. Do not rapidly turn the TV off as it may cause the TV to work abnormally.

TV Rear

NOTE

• Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.
• The TV may not be compatible with all external devices. To check compatibility, please refer to the user manual of external device.
• Do not connect external equipment while TV’s power cord is plugged in. It may cause electric shock.

Making Connections

• ANT Connect an outdoor VHF/UHF antenna or cable.
• HDMI / AVConnect a HDMI / AV cable from an external AV equipment. No sound connection is needed for HDMI to HDMI connection. If the signal resolution does not match the specification table, you need to change the setting of device according to the table. Please consult your device user manual for instruction.
• To select the HDMI / AV Press the INPUT button, when the list of input Source appears, press the / buttons to select the source HDMI / Composite, then press the OK button to connect.
• HEADPHONE Connect Headphone for audio out of the TV.

ATTENTION
Excessive sound pressure from earphones and headphones can cause hearing loss.

NOTE
Please make sure that the headphone you plug in is without microphone function, or it may not be supported.

• DIGITAL AUDIO OUT Connect to an external digital audio system. Before connecting a digital audio system to the DIGITAL AUDIO OUT jack, you should decrease the volume of both the TV and the system to avoid that the volume suddenly becomes bigger.

• ARC Connect an HDMI cable from an external digital audio system.ARC enables the TV to directly output the digital sound through an HDMI cable. Please note that it works only when the TV is connected to the audio receiver that supports the ARC (Audio Return Channel) function. When this port is used as the ARC function, it can’t be used as signal input at the same time.

• USB
  Connect the USB 1.1 and USB 2.0 devices such as hard drives, USB sticks and digital cameras for browsing photos, listening to music and watching movies.

• NOTE
  When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. If a USB 1.1 or USB2.0 device requires more than 500mA or 5V, the USB device may not be supported. Max supportedcurrent for USB 3.0 device is 1A (only for some models). Exceeding the max supported current may result in damage or data loss. Certain digital cameras may not be compatible with the TV.
  LAN (Wired setup)

• Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below.

• We recommend you to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks already have

Wireless setup
Connect your TV to your wireless network, you need a wireless router or modem. See the illustration below.

• The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n/ac communication protocols.

NOTE

• You must use the built-in Wireless LAN Adapter to use a wireless network because the set doesn’t support external USB network adapter.
• If the wireless router supports DHCP, your TV can connect more easily to the wireless network.
• If you apply a security system which is not listed below, it will not work with the TV.
• Security system : WPA, WEP, WPA2.
• In order to guarantee smooth network, the distance between router and TV should be less than 10 meters.

Remote Control

NOTE
The included remote control will vary depending on model, country or region. Check information according to the actual remote control in the accessory bag.

Installing Batteries in the Remote Control

1.  Slide the back cover to open the battery compartment of the remote control.
2.  Insert two AAA size batteries. Make sure to match the (+) and ( – ) ends of the batteries with the (+) and ( – ) ends indicated in the battery compartment.
3.  Close the battery compartment with the cover.

NOTE

• Product image is only for reference, actual product may vary in appearance.
• Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire. Do not mix battery types or combine used batteries with new ones.
• Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
• If you do not intend to use the remote control for a long time, remove the batteries.
• Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

Pairing the Remote Control (only for bluetooth remote control)

1.  Pair the remote to the TV after you power it on. Keep the remote control within 3 metres from the TV. Press and hold the button at least 3 seconds to start pairing.
2.  If the remote paired successfully then a confirmation will display on the screen. If it did not pair successfully then an ‘unsuccessful’ message will display. Repeat step 1. NOTE
   • If an unknown error occurred with the remote then it could have been caused by interference. Try to remove what’s causing the interference and pair it again.
   • If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries, press any key for 1~2 seconds, and insert them back. then the remote control will work normally.
   • The remote cannot be paired to the TV while the TV is in standby mode.

Remote Control Operation Range

1.  The remote control can work at a distance of up to 8 meters in front of the TV set.
2.  The remote control angle: taking the remote sensor as an apex, 6 meters away, its controlled horizontal angle is within ±30°, while the vertical angle is within ±15°.
3.  The operating distance may vary depending on the brightness of the room.

Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste. It should be packed and handed over to authorised re-cycler.

Turning the TV on for the First Time

• Connect the mains cable to the mains socket after you have completed all the connections.
• The first time you turn the TV on, it will go straight to the Installation Guide.
• The guide setting is completed according to the boot navigation prompt. The navigation information is specific to the actual condition.
• The Home screen will be your starting point for navigating the TV.

Specifications

Features, appearance and specifications are subject to change without notice. If you encountered difficulty when setting up your TV, we suggest you refer to the troubleshooting tips in the User Manual or the E-Manual.

Item|

32″

---|---

Dimension (mm)

| Without Stand (W × H × D)| 721 × 430 × 73
With Stand (W × H × D)| 721 × 470 × 164

Weight (kg)

| Without Stand| 3.8
With Stand| 3.9
Active Screen Size (Diagonal)

(cm)

|

80

Screen resolution| 1366 × 768
Speaker power| 10W + 10W
Power consumption| Please refer to the rating label.
Power supply| 100 – 240V      50/60Hz
Standby Power| 0.5W

Receiving systems

| Analog| PAL-D/K, B/G, I      SECAM-D/K, B/G
Digital| DVB-T/T2, DVB-C

Environmental conditions

| Temperature: 5°C – 45°C

Humidity: 20% – 80% RH

Atmospheric pressure: 86 kPa – 106 kPa

HDMI Input

| RGB / 60 Hz (640×480, 800×600, 1024×768)

YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)

YUV / 50Hz (576 I, 576 P, 720 P, 1080 I, 1080 P)

Other Information

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD Master Audio, DTS-HD, Virtual:X, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. ©2020 DTS, Inc. ALL RIGHTS RESERVED.

References

• Patents - DTS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>