Shenzhen Lesoi Creative Technology F2 Wireless Speaker Instruction Manual
- June 5, 2024
- Shenzhen Lesoi Creative Technology
Table of Contents
Shenzhen Lesoi Creative Technology F2 Wireless Speaker
OPERATING GUIDE
-
Power ON / OFF
Turn the switch 。n the back of the speaker: ON / OFF.
Mode switching -
Press & hold ”
key: Switch between BT / U Disk / TF card / AUX. -
Wireless mode
Open the phone BT function, select the product’s pairing code, and the speaker is
connected after the success of sound -
U Disk Play
Insert the U Disk, the speaker s。unds, you can play music -
TF card (Micro SD) Play
Insert the TF card, the speaker sounds, you can play music -
AUX (Line-in)
Use a 3.5mm audio jack to connect to the speaker’s AUX connect and the other end to your phone’s or computer’s headphone jack. With the speaker sounds, you can use external audio to play music; AUX mode, you can not switch the previous song/the next song. Phone call/HandsfreeWhen the speaker is in the Bluetooth connection status, if the mobile phone has an incoming call, the speaker will make a ringtone. Press the >key to answer the call and press it again to hang up. Double-click the “> key to redial the last dialed-outnumber. Charge batteryPlug the USB cable into the speakers and connect the 5V charger or computer to charge the speakers. Slow blue lights: work status linking blue: Waiting to connect. Red steady: charging. Remarks: VWithin 10 seconds after power-on, you can press the “> key 2 times to switch between Chinese/English prompts. languages.
FCC Statment
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will notoccur
in a particular installation. If this equipment does cause harmful
interference toradio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>