Cheerdots CHP02 CheerTok Smart Device User Manual

Cheerdots CHP02 CheerTok Smart Device

Basic Operations

Turn ON/OFF

Turn On:
Long press Fn button until the blue light blinks, then “CheerTok” can be found by host.

Trun Off:
Long press Fn button, the green light will turns on, press and hold the button till green light turns off.

Quick Shutdown:
Press the main button and Fn button at the same time.

Connection

Connect to MacOS
Open “System Preferences” , choose “Bluetooth” turn on bluetooth and search, you will see “CheerTok” in searching bar, click to connect with your CheerTok.

Connect to Windows
Click “Start” icon , then open “Settings” , select “Devices” turn on the Bluetooth switch ,
then click “Add Bluetooth or other devices” , choose “Bluetooth”, then you can search and connect with “CheerTok” on the “Add a device” page.

Connect to iPad/iPhone
Open “Settings”@-> “Bluetooth” t -> Search for devices to connect with “CheerTok”. lf the mouse cursor is not shown on the screen, you can turn on the cursor following below steps: “Settings”-> “Accessibility” ->” Touch” ->”AssistiveTouch”, then mouse cursor will be displayed on the screen. Mouse cursor can still be shown normally when you turn off “Assistive Touch” after that.

Connect to Android
Open “Settings” -> “Bluetooth” -> turn on Bluetooth and search devices, then you can find “CheerTok” in searching list, click & connect.

Working on Android

1. Main Button
   Quick Click: Go Back Double Click: Home Page Long press: Laser On

2. One Finger Touch
   Keep press the trackpad: Drag Slide side: Scroll Up/Down Slide top: Scroll Left/Right Slide botton: Sliding Tiktok Progress Bar

3. Two Fingers
   Pinch with 2 fingers: Zoom In/Out

4. Quick screenshot
   Press main button&VOL- at the same time. For some phone brands, need to press home  button&VOL+.

Working on iPhone/iPad

1. Main Button
   Quick Click: Home Page Double Click: Show Multitasks Long press: Laser On

2. One Finger Touch
   Long press drag mode: Drag Slide side: Scroll Up/Down Slide top: Scroll Left/Right Slide botton: Scroll Left/Right

3. Two Fingers
   Pinch with 2 fingers: Zoom In/Out

4. Quick screenshot
   Press main button&VOL+ together for no physical Home button iPhone/iPad; For those with a physical home button, press main button&VOL-.

Working on Win/Mac

1. Main Button
   Long press: Laser On

2. One Finger Touch
   long press drag mode: Drag Slide side: Scroll Up/Down Slide top: Switch Page
   

3. Two Fingers
   Slide Up/Down with 2 fingers: Scroll Up/Down Pinch with 2 fingers: Zoom In/Out Tap with 2 fingers: Right click menu

Recording/Playing

1. Start recording
   Long press Fn button until green light

2. Recording gestures
   Touch, buttons, screenshots, etc.

3. Stop recording
   Tap Fn key,the green light is off

4. Playing
   Single playback (Tap Fn key, the green light flashes quickly) Loop playing (double click Fn key, the
   green light blinks slowly)

5. End playing
   Tap Fn key, the green light goes off

Note
Device operating temperature range is-10° C ~40° C (14 ° F~l04 ° F) Recharging the CheerTok every 3 months is recommended, which will maximize the battery life span.

Warning
Strong laser beam will do harm to eyes.

• Do not look directly at the laser beam when laser turned on.
• Do not point to other people’s eyes.

Product parameters

FCC Statment

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>