hager XEVA100 Cable Hook for Charging Station Instruction Manual
- June 5, 2024
- hager
Table of Contents
6LE007285B
installation manual
Cable hook for charging station
XEVA100 / XEVA100IZI
Wall mounting
Mounting on the charging station
Safety instructions
Electrical devices must only be installed and assembled by a qualified electrician. The accident prevention recommendations applicable in the country must be followed. Failure to follow the installation instructions may result in damage to the device, fire or other dangers.
- Please follow the recommendations and standards applicable for SELV electrical circuits during installation and when laying cables. Before any work on the device or the load, switch off the power to the installation.
- Do not forget all the circuit breakers that deliver voltages that are potentially dangerous to the device or the load.
- Risk of electric shock.
- The charging station must be powered off when replacing a spare part.
- When changing the defective part, make sure that environmental conditions (rain, mist, snow, dust, wind, etc.) are not a potential source of danger or breakage during handling and when powering on.
- When installing the replacement part, make sure that all of its parts are correctly positioned and waterproof.
Recommendations
Do not access or tamper with any internal sections of the device beyond those
mentioned in these instructions. Doing so will void the warranty and any other
assistance. Indeed, this kind of tampering may cause damage to electrical
components and/or parts.
These products have been designed so that there is no need to access these
areas as part of set-up and maintenance.
Can be used anywhere in Europe ****and Switzerland
This document is not contractually binding and is subject to change without notice.
Service Assistance Technique
https://help.hager.fr/installation-produits/
6LE007285B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>