Dongguan Feitianqi Trading AP550A1 True Wireless Earbuds User Manual

Dongguan Feitianqi Trading AP550A1 True Wireless Earbuds PACKING LIST

DIAGRAMPOWER ON

1. MOde1The earphones automatically turn on (Born earbuds write LED Will stay on for 1 Second) when you open the charging case.
2. Mode 2: In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( Both earbuds’ white LED will stay on for 1 second).

POWER OFF

1. Mode 1: Put the earphones back in the charging case and close the case to turn them off.
2. Mode 2: If the earphones are not in the charging case, just press and hold the MFB[Multifunctional Buttons) on either earbud for5 seconds to power them off.

PAIRING

1. Mode 1: Automatically Enter Paring
2. When the earbuds are in the charging case you can open the case.
3. If you use these earbuds for the first time, wait for several seconds, then the earbuds automatically enter paring mode. Here the LED will fash white and red alternately.
4. Select”Siren V1 on your device’s Bluetooth setting interface. Note: The earbuds will prioritise automatic reconnection to already paired devices, when opening the case the time after. If you want to pair the product to another device, please disconnect Bluetooth on the paired device.
5. Mode 2: Manually Switch to Pairing
6. When both earbuds are not in the charging case and in power-off mode (keep pressing both earbuds for 5 seconds to turn them off).
7. Keep pressing both earbuds for 4 seconds in order to re-enter pairing mode where the LED flashes red and white alternately 3
8. Finally, choose “Siren V on your device.

MUSIC INCOMING CALL

1. Increase/ Decrease Volume Tap once the Right[R) earbud to increase one volume level Tap once the Left (L) earbud to decrease one volume level.
2. Play/Pause: Double-tap either earbud.
3. Next/Previous Track Triple-tap the Right(R) earbud to skip to the next track. Triple-tap the Left[L) earbud to skip to the previous track.
4. Answer a Call Double-tap either earbud. End a Cal Double-tap either earbud.
5. Reject Press and hold either earbud for 2 seconds.
6. Activate Siri Press and hold the Right (R) earbud for 3 seconds.

RESET

In the shutdown state, long-press the MFB button for 10 seconds, after the red light flashes quickly, double-click the MFB button, the red light is off, and the white light is on 3 times, the light is off to enter the pairing mode.

CHARGING

Open the case to view the charging case’s remaining battery life

Mode1: Wired Charging

Do not put the earbuds in the charging case when the earbuds are wet.

FCC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Mode2: Wireless Charging

Note: the wireless charger is sold separately.

CORRECT DISPOSAL OF THIS PRODUCT

Waste Electrical & Electronic Equipment) this Marking showed on the product or its literature. indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government office, for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>