VERPAN AZ666937 Portable Pantop Light Instruction Manual
- June 5, 2024
- VERPAN
Table of Contents
ASSEMBLY INSTRUCTIONS
Pantop Portable
Design by VERNER PANTON
Please read thoroughly before use
AZ666937 Portable Pantop Light
1| 
| CONTENT:
A PANTON TABLE LAMP. THE LAMP IS DELIVERED FULLY ASSEMBLED.
B USB CHARGING CABLE
---|---|---
2| 
| BEFORE USE, THE BATTERY IN THE LAMP MUST BE FULLY CHARGED.
PLACE THE MAGNETIC CHARGING CABLE AT THE BOTTOM OF THE LAMP.
CONNECT THE USB CABLE TO A POWER SUPPLY.
3| 
| CHARGING: RED LIGHT
FULLY CHARGED: GREENLIGHT
4| 
| THE LIGHT INTENSITY OF THE THE LAMP CAN BE ADJUSTED BY
TOUCHING THE DIMMER KNOB ON THE TOP OF THE LAMP.
THE LAMP HAS 3 LIGHT
INTENSITY LEVELS: 100%, 70% AND 30%.
IMPORTANT:
– THIS LAMP IS FOR INDOOR USE ONLY. IT CAN BE TAKEN OUTDOORS BUT MUST BE KEPT
AND STORED INDOORS.
– BATTERIES MUST BE DISPOSED OF ACCORDING TO LOCAL ENVIRONMENTAL LAWS FOR
WASTE DISPOSAL.
– WIPE THE SURFACE WITH A SOFT, DAMP CLOTH, AND WIPE IMMEDIATELY WITH A DRY
CLOTH. DO NOT USE ANY ABRASIVE CLEANING TOOLS. – THE BATTERY MUST BE REMOVED
FROM THE LAMP BEFORE IT IS SCRAPPED; THE APPLIANCE MUST BE DISCONNECTED FROM
THE SUPPLY MAINS WHEN REMOVING THE BATTERY; THE BATTERY MUST BE DISPOSED OF
SAFELY.
– IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT
SHALL BE REPLACED BY A SPECIAL CORD OR CORD EXCLUSIVELY AVAILABLE FROM THE
MANUFACTURER OR HIS SERVICE AGENT.
– THE PRODUCT SHALL BE SUPPLIED BY AN EXTERNAL SELV CONTROLLER WITH 5V MIN. 1A
OUTPUT.
- INPUT MICRO USB CABLE 5.0 = 1A
- 1.5W LED BOARD (REPLACEABLE)
- CHARGING TIME: 5 HOURS
- OPERATION TIME IN HIGHEST SETTING: 7 HOURS
DESIGNED
IN THE PAST
MADE FOR TOMORROW
VERPAN
Egeskovvej 29
8700 Horsens
Denmark
www.verpan.com
info@verpan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>