Hisense HWFY7514 7.5kg Front Load Washer User Manual
- June 5, 2024
- Hisense
Table of Contents
Hisense HWFY7514 7.5kg Front Load Washer
OVERVIEW
- A: Program selector
- B: Program and function status display window
- C: “Temp.” button
- D: “Spin” button
- E: “Favourite” button
- F: “Options” button
- G: “Delay End” button
- H. “Start/Pause” button
- I: Child Lock Function
- J: Mute Function
PARAMETER
PARAMETER
Model
| HWFY7514/
HWFY7514S/ HWFY7514T
| HWFY8514/
HWFY8514S/ HWFY8514T
| HWFY9514/
HWFY9514S/ HWFY9514T
| HWFY1014/
HWFY1014S/ HWFY1014T
Washing Capacity| 7.5kg| 8.5kg| 9.5kg| 10.0kg
Max.spin speed| 1400rpm| 1400rpm
Net Weight| 58kg| 67kg
Dimension(WXDXH)| 595X540X845mm| 595X610X845mm
Rated Voltage| 220 -240V| 220 -240V
Heating Power| 1500W| 1500W
Washing Power| 300W| 250W
Add Detergent, Close the Door and Set the Program
Add Detergent, Close the Door and Set the Program
Load the clothes to be washed in the drum and close the door. Add the detergent into the relevant compartments for the type of program you are going to select, Add detergent as described in the Detergent and Additives section of User’s Operation Manual.
- Turn on the power.
- Spin program selection button to required program, “off” must be passed through if pointer’s initial position is not “off ”,startup.
- Select washing temperature, and the spin speed by pressing the “Temp”, and “Spin” buttons.
- Press the “Options” button to select additional functions.
- After starting the program, the display window displays program length (hours: minutes) and additional function options in sequence
Addition function selection
At standby state, press the “Options” button to select an additional function for the current program. Select only one function for each press, and then the corresponding icon flashes. After starting up, the program cannot be changed
Pre-wash
- Select the function to conduct pre-wash so as to enhance washing effects and better remove stains. This function is suitable for heavy dirt clothes.
- Before inflowing, laundry detergent/ washing powder can be added to the pre-wash box, and washing powder must be added to the main wash box.
Extra Rinse
After setting the function of rinsing adding, the program runs the rinsing
process once again before running the softening, and the total running time of
the program increases accordingly. Intensive
The function can be selected to prolong washing time, strengthen washing
effects, and better remove stains.
Inlet water warning: If tap is not opened, or water pressure is over low, the display screen will prompt “F01” to give the alarm.
Drainage warning: If the pipe is squeezed, drainage will not be smooth. In case of failing to completely drain for a long time, the display screen will prompt “F03” to give the alarm.
Door Lock Icon
After the program starts the Door Lock icon will light up and the door will be locked.
- After completing the program, door lock unlocks automatically. During pause, if door opening condition can be met halfway, the door lock will unlock and its indicator light will go out.
- When door lock indicator light flashes, the door shall not be opened
Delay End Function
The Delay end function allows running the machine at the consumers’ convenience, for example, at night when electricity is cheaper.
- Only under the standby mode, this button is valid for selecting the reservation time.
- After the reservation function is selected, the time will increase 1h when each time the reservation button is pressed. Before reservation, if the program time does not satisfy the integral multiple of 1h, it shall be completed by pressing the reservation key for the first time, and then the time increases 1h when each time the reservation button is pressed. If the reservation is selected, before the program runs, the current reservation can be canceled by turning the button to select other programs.
- The delay time must be longer than the wash program length as the delay time is the time program will finish. For example: if the selected program time is 02:28, the delay time selected must be between 03:00 and 24:00.
- When the reservation process is operated, the icon of ‘reservation time’ will be on. When the reservation process is finished, the icon of ‘reservation time’ will be off, while the icon of the ‘remaining time’ will be on.
Favorite
After selecting the program and setting each parameter and starting, long-
press the Favorite key for 3s to memorize the selected program, temperature,
rotational speed and other related settings, and then the Favorite symbol lamp
will be on. Under the circumstance that the Favorite lamp is not on, short
press the Favorite key, then the program will be switched to the program
memorized last time; and the meantime, the temperature, rotational speed and
other parameters will automatically change into the parameters memorized last
time.
At this moment, if switching the program or pressing other keys, the panel
will display a new program and parameters, and the Favorite symbol lamp will
be off.
When the user uses it for the first time, if he/she has never long pressed the
Favorite key to collect programs, he/she can short press the Favorite key and
then the cotton-linen program and its default settings will be collected by
default.
Mute Function
When the machine is in the state of holding, pausing or operating, press the “Spin+ Favourite” buttons for 2 seconds, The display will show a mute function fault icon. All the buzzing will be turned off except the alarms. When the machine is in the mute state, press the “Spin+ Favourite” buttons for 2 seconds until the mute function fault icon light off. All the buzzing will be activated.
Automatic weighting:
The washing machine displays “—-” after startup, indicating that it is
weighing automatically. It will adjust the program length (hours: minutes)
automatically according to the weight of the clothes.
Child Lock
To strengthen the safety of children, this machine is equipped with a Child
Lock function.
When the program starts, press the “Temp. +Spin” button for 2 seconds. The
child Lock icon will light up, and then Child Lock is set up. Repeat the same
operation, the Child Lock will be released.
- When the Child Lock is set, all function buttons will be shielded.
- When you turn the machine off by rotating the program selection button“Off”, the child lock is released.
- After completing the program, the child lock will automatically unlock.
To Start the Program
After you have selected your options and placed detergent within the detergent dispenser, turn on the water tap and press the “Start / Pause” button. The screen will display the current program progression with icons from left to right. It also displays the remaining program time.
To cancel the Program or Reselect the Options
- Rotate the program to “Off” for 3 seconds to turn off the machine.
- Select the new program and options.
- Press “Start / Pause” button to turn on the machine without adding any extra detergent.
End of the Program
When the program finished its running, it will display “End”. If no operation is taken in 2 minutes, the machine will turn off automatically.
- Rotate the program to “Off” to turn off the machine;
- Close the tap;
- Open the door and take the washed clothes out;
- Slightly open the door to remove moisture in the pump.
Reload in Process
If you want to reload clothes in the process of washing, please press “Start/Pause” button.
- If reload icon lights up, the door can be opened in the process, remaining time and the Door Lock icon in the display will flash. Then the Door Lock icon will go out, and the door can be opened.
- If reload icon doesn’t light up, the Door Lock icon
doesn’t flash, it indicates that the current temperature is over 50℃ or you have passed the time for reloading in the process, namely no clothes are allowed to load into the machine.
Fault codes
- This clothes washer is equipped with automatic detection of operational errors and malfunctions.
- A fault code that identifies the problem will appear on the control panel to notify users. Please refer to page 20 of the User Manual for information on fault codes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>