HUOMU

Earbuds Headphones 5 in One Pack, Wired Earbud with Heavy Bass Stereo

Noise Blocking

Specifications

• BRAND : HUOMU
• EAR PLACEMENT : In-Ear
• COLOR : Multi
• CONNECTIVITY TECHNOLOGY : Wired
• MODEL NAME : 1
• PRODUCT DIMENSIONS: 7.87 x 3.93 x 0.67 inches
• ITEM WEIGHT: 3.2 ounces

Introduction

Play, pause, answer/end a call, and skip/previous tracks can all be done with a single button, making the operation more convenient. When wearing the earphone, there is a built-in microphone for hands-free communication. Each of the five earbud & in-ear headphones has a unique ergonomic in-ear structure that properly fits your ears. The 3.9-foot sturdy wired earphones give a comfortable fit for gaming, hiking, or jogging, among other activities. It has solid sound-insulating material and powerful bass stereo which deliver outstanding sound while reducing ambient noise, allowing you to enjoy clear music. There are five distinct color styles to choose from to suit your preferences.

It has Wide Compatibility. 3.5mm wired audio jack compatible with iPhone, Android Smartphones, Laptops, PS4 DualShock, Nintendo Switch, and any other device having a 3.5mm audio port. You can enjoy a solid sound transmission from your devices thanks to the gold-plated connector. Please do not hesitate to contact us if you have any problems with the earphones. We will give you with technical assistance and return service, ensuring that you will enjoy your purchase for a long time.

HOW TO OPERATE

Select the headphones from the drop-down menu. Pull down the shade from the top of the phone and long-press the Bluetooth symbol on an Android device. It will immediately take you to the Bluetooth menu, where you may switch it on and then search for devices. To pair your headphones, tap the name of the headphones you’re trying to pair.

HOW TO USE

• STEP 1: Turn on your earphones’ pairing mode.
• STEP 2: On your phone, go to Settings – Bluetooth.
• STEP 3: Scan the Bluetooth category for new devices.

Frequently Asked Questions

• When my wireless earphones are fully charged, how do I know?
  When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged.

• What’s the best way to pair left and right earbuds?
  STEP 1: Press and hold the power button on both earbuds for around 15 seconds until the LED flashes BLUE.
  STEP 2: Once connected, the LED on the left earbud will flash BLUE twice every 5 seconds, while the LED on the right earbud will alternate between flashing BLUE and RED, signaling pairing mode.

• Why aren’t my earbuds communicating with one another?
  Your device’s Bluetooth setting should be turned off. When you take the earbuds out of the case, they will immediately switch on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: If something doesn’t work the first time, give it another shot.

• Why aren’t my earbuds pairing with each other?
  If your headphones’ battery is low, they may have difficulties pairing—and I’ve even discovered that certain Bluetooth headphones remain turned on when in the case, meaning they’ll drain to 0% faster than you think. Even if they say they have some battery remaining, try putting them in and charging them completely before pairing.

• What is the purpose of the button on my earbuds?
  That’s the microphone that’s built into your headphone cord. This means that the device has a microphone incorporated into the wire of the headphones, allowing you to answer phone calls or utilize voice commands without having to remove your headphones.

• How do earbud buttons work?
  Basically, it’s just a few buttons that change the resistance between a few pins on a 1/8″ TRRS headphone connector. Normally, these buttons would connect the resistor to the microphone (in parallel). Two wires are required for a conventional microphone: the mic output signal and GND.

• What is the best way to charge earbuds?
  You may charge your headphones with a USB cable; connect to charge, and when the case is fully charged, a light will appear; then, place your earbuds in the case, and the earbuds will begin charging.

• How long do earbuds take to charge?
  The earphones take around 2 hours to fully charge. If the battery is low, charging it in the charging case for 10 to 20 minutes can give you an extra hour of use.

• When not in use, can I store wireless earbuds in a charging case?
  Do not leave your earbuds or charging case plugged in for an extended period of time. Unplug the cable once they’re fully charged. Also, if you’re planning to put your headphones away for a week or longer, consult the manual for any specific storage instructions.

• When only one of the wireless earphones works, how do you fix it?
  To repair bluetooth earbuds, you must first restart the headset. If it doesn’t work, you might try resetting Bluetooth and pairing. If it doesn’t work, check the audio settings on your phone or computer. Otherwise, we believe your sound is the source of the problem.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>