Dayton Audio KABD-430 Bluetooth Amp Board with DSP User Guide
- June 5, 2024
- DAYTON AUDIO
Table of Contents
Dayton Audio KABD-430 Bluetooth Amp Board with DSP User Guide
Product Overview
- Pot 4
- Pot 3
- Pot 2
- Pot 1
- Standby Switch Connector
- Line Input Connector
- External Bluetooth Antenna Option
- Bluetooth Status LED
- External Bluetooth Status LED Connector
- Bluetooth Pairing Switch Connector
- Speaker Output Connector J11
- 10 to 26 VDC Power Connector (Typ. 24 VDC)
- Speaker Output Connector J12
- LBB Series Battery Board Connector (12 or 21 VDC)
- Signal Detection Status LED
- Programming Connector for ICP1 or KPX
- I2S Audio Signal Output (Digital Only)
The KABD-430 supports PBTL (bridging) on each speaker port, allowing for 4.0,
2.1, or 2.0 modes.
Connecting the MODE pin to GND on either J11 or J12 will enable STEREO mode on
that connector, or leave MODE and GND disconnected to enable MONO mode on that
connector.
MONO
MONO
MODE DISCONNECTED FROM GND| Pin| Function| Pin|
Function| Pin| Function
1| GND| 3| MONO+| 5| MONO-
2| MODE| 4| MONO+| 6| MONO-
CONNECT MODE TO GND
STEREO
STEREO
MODE CONNECTED FROM GND| Pin| Function| Pin|
Function| Pin| Function
1| GND| 3| OUTR-| 5| OUTL+
2| MODE| 4| OUTR+| 6| OUTL-
DISCONNECT MODE FROM GND
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>