elcometer 510s Automatic Adhesion Tester User Guide
- June 5, 2024
- elcometer
Table of Contents
- 1 GAUGE OVERVIEW
- 2 BOX CONTENTS
- 3 USING THE GAUGE
- 4 GETTING STARTED
- 5 SECURING THE DOLLY
- 6 ATTACHING THE GAUGE TO THE DOLLY
- 7 PERFORMING THE TEST
- 8 ASSESSING THE RESULTS
- 9 BATCHING
- 10 REVIEWING BATCH DATA
- 11 VERIFYING THE GAUGE CALIBRATION
- 12 MENU STRUCTURE
- 13 DOWNLOADING DATA
- 14 UPGRADING YOUR GAUGE
- 15 SPARES & ACCESSORIES
- 16 ADHESIVES
- 17 WARRANTY STATEMENT
- 18 TECHNICAL SPECIFICATION
- 19 LEGAL NOTICES & REGULATORY INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
elcometer 510s Automatic Adhesion Tester User Guide
1 GAUGE OVERVIEW
2 BOX CONTENTS
3 USING THE GAUGE
4 GETTING STARTED
4.1 FITTING THE BATTERIES
4.2 SELECTING YOUR LANGUAGE
4.3 SCREEN SETTINGS
4.4 SETTING UP THE READING DISPLAY
4.5 SELECTING THE MEASUREMENT UNITS
The Elcometer 510 Model S can display pull test results in MPa. psi, Newtons or N/mm2. To select the measurement units, press Menu/Setup/Units.
4.6 SELECTING THE DOLY SIZE & PULL RATE
5 SECURING THE DOLLY
5.1 USING 10mm, 14.2mm OR 20mm DOLLIES
5.2 TESTING COATINGS ON CONCRETE USING 50mm DOLLIES
6 ATTACHING THE GAUGE TO THE DOLLY
7 PERFORMING THE TEST
8 ASSESSING THE RESULTS
8.1 EXAMINING THE DOLLY
8.2 EXAMINING THE DOLLY (COATINGS ON CONCRETE)
9 BATCHING
9.1 BATCH FUNCTIONS
9.2 CREATING A NEW BATCH
10 REVIEWING BATCH DATA
10.1 BATCH STATISTICS (Batch/Review Batch/Statistics)
10.2 BATCH READINGS (Batch/Review Batch/Readings)
11 VERIFYING THE GAUGE CALIBRATION
12 MENU STRUCTURE
13 DOWNLOADING DATA
14 UPGRADING YOUR GAUGE
15 SPARES & ACCESSORIES
15.1 DOLLIES
15.2 DOLLY CUTTERS
15.3 DOLLY SKIRTS
15.4 MAGNETIC ANCHOR CLAMP
16 ADHESIVES
17 WARRANTY STATEMENT
18 TECHNICAL SPECIFICATION
19 LEGAL NOTICES & REGULATORY INFORMATION
Read User Manual Online (PDF format)
Loading......