LiFE Ice Core 80W Evaporative Air Cooler with Ion User Manual

June 5, 2024
LIFE

LiFE Ice Core 80W Evaporative Air Cooler with Ion

LiFE-Ice- Core-80W-Evaporative-Air-Cooler-with-Ion-
product

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
Read the operating instructions carefully before putting the appliance into operation and keep the instructions, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

USER MANUAL SYMBOLS

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:
WARNING: This sign warns you of dangers to your health and indicates possible injury risks.
CAUTION: This sign refers to possible hazards to the machine or other objects.
NOTE: This sign highlights tips and information

SAFETY INSTRUCTIONS

  1. Use the air cooler only for purposes described in the instruction manual.

  2.  The appliance is designed exclusively for private use and for the envisaged purpose.

  3.  Check that the voltage indicated on the appliance rating label corresponds to the voltage in the mains.

  4.  Always use on dry, level surface.

  5.  To protect against electrical shock, do not immerse the device, plug or cord into water or any other liquid or spray with liquids.

  6.  Unplug from the electrical outlet when not in use, when moving the air cooler from one location to another, before putting on or taking off parts and before clearing.

  7.  Do not operate the machine without supervision. If you leave the room, you should always turn the device off.

  8.  Do not place heavy objects or objects containing liquids on the device.

  9.  Avoid contact with any moving parts.

  10. CAUTION: To avoid injury, do not insert your fingers between the grilles when the appliance is plugged in or when it is turned on.

  11. CAUTION: Do not place clothes or other objects on the fan.

  12.  CAUTION: Do not use the appliance near curtains.

  13.  CAUTION: Do not cover the air inlet and outlets of the appliance.

  14.  Do not operate any appliance, with a damaged cord plug after the appliance malfunctions, or has been dropped damaged in any manner. The use of accessories not recommended or sold by the appliance manufacturer may cause hazards. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

  15.  Do not use the appliance before assembling it.

  16.  Do not use the appliance outdoors, in bathroom, swimming pool or in rooms with high humidity level or in dusty areas.

  17.  To disconnect from the mains, firstly turn off the appliance from control panel and after that grip the plug and pull from the wall outlet. DO NOT pull on the cord.

  18. CAUTION: Do not pull the power cord with wet hands. Risk of electric shock!

  19.  Do not connect the air cooler with another appliance together in the same socket.

  20.  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

  21.  Children should be supervised to ensure that they do not play with the appliance. In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
    CAUTION: Do not allow babies and children to play with the foil. There is a danger of suffocation!

  22.  The display of water level of water tank should be less than MAX level while appliance is operating.

  23.  The display of water level of water tank should be more than MIN level while appliance is operating in humidifying function.

  24. Do not move or lean the appliance when it is filled with water. Empty the water tank before moving.

  25.  Do not insert your hands or any other foreign body into the appliance during operation. Pay special attention to children.

  26.  You should never use the air cooler without filters.

BATTERY SAFETY INSTRUCTIONS (OF REMOTE CONTROL)

  1.  Different battery types or new and used batteries must not be used together.
  2.  Batteries can leak and lose battery acid. If the remote control is not used for a long period of time, remove the batteries.

TECHNICAL SPECIFICATIONS

  • Power: SOW
  • Input Voltage: 220-240V-, 50Hz

NOTE: An air cooler is a device that cools air through the evaporation of water. Evaporative cooling differs from other air conditioning systems, which use vapor-compression or absorption refrigeration cycles. Evaporative cooling uses the fact that water will absorb a relatively large amount of heat in order to evaporate. The temperature of dry air can be dropped significantly through the phase transition of liquid water to water vapor (evaporation). This can cool air using much less energy than refrigeration.
The cooling potential for evaporative cooling is dependent on the wet-bulb depression, the difference between dry-bulb temperature and wet-bulb temperature

PARTS IDENTIFICATION

  1.  Dust filter
  2.  Cooling pad
  3.  Back part of the appliance
  4.  Control panel
  5.  Air outlet
  6.  Water tank
  7.  Ice pack
  8.  Remote control

CONTROL PANEL

LiFE-Ice- Core-80W-Evaporative-Air-Cooler-with-Ion-
fig2

  1.  Cooler function button
  2.  Swing function button
  3.  Timer function button
  4.  ON / OFF button
  5. . Mode selection button
  6.  Speed selector button
  7.  function ANION
  8.  Cooler function light indicator
  9.  Swing function light indicator
  10.  High speed level light indicator
  11. Medium speed level light indicator
  12.  Low speed level light indicator
  13.  Sleep mode light indicator
  14. . Natural mode light indicator

REMOTE CONTROL

LiFE-Ice- Core-80W-Evaporative-Air-Cooler-with-Ion-
fig3

  1. ON / OFF button
  2.  Function selection button
  3.  Speed selection button
  4.  Swing function button
  5.  Cooler function button
  6.  ANION function button
  7.  Timer function button

OPERATING INSTRUCTIONS

  1.  Place the air cooler on a dry, level surface.

  2.  Before connecting the appliance, make sure that the power supply of your appliance corresponds exactly to the voltage in the mains.

  3.  Before turning on the air cooler, you must fill the tank with water. Fill the water tank with cold tap water and ensure that water does not exceed the maximum line mark on the water tank. Always fill at least to the minimum level. If necessary, place ice packs or ice cubes inside water tank for better cooling.
    NOTE:

    • If the tank runs out of water there will be a sound notification for three seconds and the water pump will stop working. Fill the tank with water before you use the air cooler again. • Water level must be between the MIN and MAX line mark.
    • After some time operation, dust and dirt may appear in water tank. It is recommended to change the water and clean water tank frequently.
  4. Press ON/OFF button on control panel or using the remote control in order to turn on the air cooler. You will hear a notification sound and the appliance will start working at the lowest speed level. To turn the air cooler off, press ON/OFF button again.

SELECTION OF OPERATION MODE
The air cooler has the following 3 operation modes:

  • Sleep mode (night operation) – The appliance operates cyclically at all speed levels (high, medium, low) for specific intervals.
  • Natural mode (natural wind operation) – The device operates cyclically at all speed levels (high, medium, low) for specific intervals as a simulation of natural wind.
  • Normal mode – The appliance operates at the selected operating speed.
    Press the mode selection key on the control panel or remote control to select the desired function of the device. When selected, the corresponding mode light on the control panel will light up.

OPERATION SPEED SELECTION
Press speed button to select the desired operating speed. The device has three speed levels:

  • Press once to select the middle speed level.
  • Press twice to select the highest speed level.
  • Press three times to select the lowest speed level
    The corresponding indicator light on the control panel will illuminate.

NOTE:

  • The appliance always starts its operation at the lowest speed level.
  • Operating speed option is only available in Normal mode.

OSCILLATION MODE
Press the swing function button on the control panel or remote control to activate the oscillation mode (rotation of blades). The corresponding indicator light on the control panel will illuminate. Press again the swing function button on the control panel or remote control to deactivate the oscillation mode

TIMER
The timer can be set for a certain period of time (from 0.5 to 7.5 hours).
Press the timer button to set the desired operating time. Each power button keystroke increases the time by half an hour. When the desired time is selected, the corresponding light on the control panel will light up.

COOL FUNCTION
Press the cooling mode button on the control panel or remote control to activate the cooling function by evaporating water. The corresponding light on the control panel illuminates. Press again to turn off the feature.
NOTE: If the water level in the water tank falls below the MIN mark, firstly turn off the appliance and then fill the tank with water.

ANION FUNCTION
Press the anion function button on the control panel or remote control to activate the anion function. The corresponding light on the control panel illuminates. The air cooler will start releasing negative ions into the air for cleaner air and less dust. Press again to deactivate the function.

CLEANING AND MAINTENANCE

Follow these instructions to correctly and safely care for your air cooler.

  1.  Always unplug the air cooler before cleaning or assembly.
  2.  Do not allow water to drip on or into the air cooler motor housing.
  3.  Be sure to use a soft cloth, moistened with a mild soap solution.
  4.  Do not use hard, abrasive or corrosive detergents or solvents or any of the following as a cleaner: petrol, thinners or benzene to clean the device.

FILTER CLEANING

  1.  Catch the filtration mesh handle and pull upwards.
  2.  Clean filtration mesh with mild detergent and soft brush.
  3.  Make sure filtration mesh is completely dry before installing.

WATER TANK CLEANING

  1.  Pull out the tank and use a small cup and a sponge to drain the water from the tank.
  2.  Clean the inner part of the tank with mild detergent on a towel and then wipe it with a wet cloth.
  3.  Use a dry cloth to dry the tank thoroughly and push it back in place.

NOTE: If you do not use the appliance for a long period, please empty the water tank.

AIR COOLER HOUSING CLEANING

  1.  It is advised to use a neutral detergent and a soft cloth and to rub dry. Do not use solvents, acidic detergents, petrol or alcohol etc. to clean the plastic components, as these could be deformed or damaged.
  2.  Clean with a damp cloth and allow to dry.

STORAGE

  1.  Always unplug the appliance before storing it.
  2.  Place it in its original packaging and store it in a safe, dry location.

NOTE: The air cooler can be stored assembled.

e-mail: info@sun.gr
 www.life.gr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals