ASUS P306 Wireless Gaming Mouse User Guide
- June 5, 2024
- Asus
Table of Contents
- ASUS P306 Wireless Gaming Mouse
- Package Contents
- Specifications
- Mouse features
- Installing the battery
- Removing the battery
- Removing the USB Dongle
- Replacing the USB Dongle
- Updating the firmware and customization
- Battery Status
- Notices
- Federal Communications Commission Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ASUS P306 Wireless Gaming Mouse
Package Contents
Specifications
Resolution| DPI 1| DPI 2| DPI 3 (Default)|
DPI 4
---|---|---|---|---
Red| Purple| Blue| Green
100 DPI to 12000 DPI| 400 DPI| 800 DPI| 1600 DPI| 3200 DPI
Mouse features
- Left-click button
- Scroll wheel
- Right-click button
- DPI Indicator
- DPI button
- Forward button
- Backward button
- Mouse feet
- Optical sensor
- Connection mode switch
Installing the battery
Removing the battery
Removing the USB Dongle
Connecting your gaming mouse
- Set the connection switch to the Bluetooth mood. NOTE: Only follow step 2 when pairing your gaming mouse to a different device.
- Press and hold the Left-click button, Right-click button, and DPI button for 3 seconds until the DPI indicator LED blinks blue.
- The DPI indicator LED will light up blue for 5 seconds then switch back to the original lighting effect after successfully pairing.
NOTE: If you are pairing Bluetooth for the first time and fail after 1 minute, the DPI indicator LED lights up red for 5 seconds then reverts back to the original lighting effect.
Replacing the USB Dongle
Setting up your gaming mouse as an RF wireless mouse
- Connect the USB dongle to a USB port on your computer.
- Set the connection switch to the RF 2.4G Wireless mode.
Updating the firmware and customization
- Connect the USB dongle to a USB port, and set your gaming mouse to the RF 2.4G Wireless mode.
- Download and install the Armoury Crate from https://w.asus.com/supportonly/Armoury%20cCrate/HelpDesk Download
- Follow the software instructions to update your gaming mouse and dongle’s firmware.
- Customize your gaming mouse using Armoury Crate.
Battery Status
The DP indicator LED will blink red when the battery power is below 20%, and continue until the battery power is depleted.
Notices
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other
liability, you are entitled to recover damages from ASUS. In each such
instance, regardless of the basis on which you are entitled to claim damages
from ASUS, ASUS is liable for no more than damages for bodily injury
(including death) and damage to real property and tangible personal property;
or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed
contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims
based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum
for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE
TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR
FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST
PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED
OF THEIR POSSIBILITY.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION!
The use of shielded cables for the connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Changes or
modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
RF Exposure Warning
The equipment complies with FCC RF exposure limits set forth for an
uncontrolled environment. The equipment must not be co-located or operating in
conjunction with any other antenna or transmitter.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances
in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm.
Proper disposal
DO NOT throw the device in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. The symbol of the crossed-out
wheeled bin indicates that the product (electrical, electronic equipment, and
mercury-containing button cell battery) should not be placed in municipal
waste. Check local regulations for disposal of electronic products.
DO NOT throw the device on fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle our products, batteries,
other components as well as packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for detailed recycling information
in different regions.
References
- ASUS Global
- ÐžÑ„Ð¸Ñ†Ð¸Ð°Ð»ÑŒÐ½Ð°Ñ Ñлужба поддержки | ASUS РоÑÑии
- Official Support | ASUS Global
- Armoury Crate - Support
- ASUS в СÐГ
- Official Support | ROG Global
- Official Support | ASUS Global
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>