FalconEye Electronics 3rd -gen-multi Camera Dash Cam For Trucks. 2-4 Cam. Heavy Duty User Guide
- June 5, 2024
- FalconEye Electronics
Table of Contents
FalconEye Electronics 3rd -gen-multi Camera Dash Cam For Trucks. 2-4 Cam.
Heavy Duty
REMOTE OVERVIEW
Initial Setup Instructions
It is recommended that you FORMAT SD card when using for the 1st time or when using a new SD card.
Format SD Process:
1st Login>System Settings> Storage 1> Highlight Format and Press Ok and then
select Confirm>Exit button on remote
How to Set Time & Date Process:
Login>General Settings> Highlight Date and Time by pressing ok and then
Confirm>Exit button on remote
Key Notes:
This System will always be recording when powered on after SD card has been
formated. Make sure device is off before inserting SD Card and or Thumb drive.
No MDVR player software needed, simply export video to thumb drive, insert
thumb drive into PC/Desktop and play video file
Powering Unit
Black Wire to a ground source Tie dc+ wire and acc wire together and connect to a power source
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>