FICHERO 2555 Thermal Printer Instruction Manual

FICHERO 2555 Thermal Printer Instruction Manual

Thank you for purchasing our Mini pocket printer. This manual will provide instructions for effective and safe use of the device. Please read it carefully before use and store the manual in a safe place for future reference.

Package content

• Thermal printer
• Thermal paper roll
• USB cable – Manual

Technical data

• Size: 87×81 x42mm
• Weight: 140g – Battery: 1000mAh 3.7V
• Connection: Bluetooth 4.0 – Resolution: 203 dpi
• Print colour: black & white – Paper roll size: 56mm (length)
• 30mm (diameter) – App: Luck Jingle
• Compatible with: Android and iOS

Description of parts

1. Power button
2. Micro-USB
3. Silicone ring
4. LED indicator

Safety instructions

• For intended use only, as described in this manual.
• This is not a toy. Keep out of reach of small children.
• Do not exceed the recommended operating temperature range (0-40°C).
• Do not place near heat sources such as radiators, cookers, etc. • Keep away from sources of ignition.
• Avoid long-term exposure to direct sunlight.
• Do not place, store or use the product near water.
• Do not let moisture come into contact with any electrical parts.
• Always unplug before replacing thermal paper and for long-term storage.
• Do not attempt to repair, disassemble or alter the product yourself.
• Do not use scouring pads or an abrasive detergent to clean the device.
• Handle with care.

Operation

1. Search for Luck Jingle in the App Store and install the app.
2. Turn on the printer and activate Bluetooth on your device.
3. Double-click the power button and the printer will print out a QR code.
4. Open the app and click on ‘Not connected’.
5. Click ‘Scan to add’ and scan the QR code to connect your device to the printer.

Note:

• Do not search for the printer in the Bluetooth settings of your device.
• The printer reconnects to your device automatically after initial pairing.

Charging

• Connect the printer using the supplied USB cable directly to a power source (e.g. laptop) or to the mains via a 5V USB AC adapter.
• You can print an image while charging is in progress.
• Charging time is approximately 80 to 120 minutes.

LED battery status

• LED flashes red: low battery
• LED lights up red: charging
• LED lights up green: fully charged

Replacing/Loading thermal paper

1. Open the printer by sliding it slightly in the direction of the small arrow (fig. 1) .
2. Insert the thermal paper roll. Make sure the heat sensitive side of the paper faces up, so it will touch the print head (fig. 2).
3. Firmly close the printer (fig. 3).

Maintenance

Clean the device with a slightly damp towel and dry thoroughly with a soft cloth. Store it in a dry cool place, away from direct sunlight.

Troubleshooting

hold the power button to force the printer to restart (hard reboot).
3. **| The printer does not turn on.| low battery| Connect the device to a power source and recharge.
pressed the power button not long enough| Press and hold the power button for approx.
1 second.
4. **| Nothing comes out while printing.| paper loaded incorrectly| Reload the paper (see fig. 2).

Disposal

The crossed out wheelie bin symbol on this product is to remind you that electrical products should not be disposed of with household waste. Please dispose of it responsibly at an approved waste or recycling facility. Check with your local authority for recycling advice.

Dispose of all packaging materials in an environmentally friendly manner.

Overschiestraat 63
1062 XD Amsterdam
The Netherlands
info@fichero.eu

Download app

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>