Shenzhen Chuanglijiacheng Technology T1151 Power Bank User Manual
- June 5, 2024
- Shenzhen Chuanglijiacheng Technology
Table of Contents
Shenzhen Chuanglijiacheng Technology T1151 Power Bank
Package Contents
- 10000mAh Power Bank *1
- User Manual1
- Magnetic Metal Plate 1
- USB A to USB C Cable *1
- Mesh Pouch1
- Phone Holder 1
PRODUCT DIAGRAM
Charging The Power Bank
- Connect the other end to the USB C input port on the power bank.
- Connect the other end to the Lightning input port on the power bank.
Charging Your Device
- Connect the charging cable to the USB or USB C output port of the T1151 power bank.
- if you use wireless charging alone, the output of the wireless charger supports 5W/7.5W/10W/15W.
- Double press on the button,all outputs are turned off and the power bank goes into standby mode.
- This power bank supports low current charging. When the indicator lights on, press the button for 2 seconds, four white lights will light up once from the first to the fourth light in order, and run the light once after 5 seaonds, repeatedly cycle the light.
Wireless Charging Function Description
- The wireless charger requires a short press on the button to turn on the wireless output, and the wireless charging indicator lights up red, which means the wireless charging function is turned on.
- The blue of wireless charging indicator lights on, and is on behalf of the output mode. If no device is put in within 35 seconds of turning on the wireless charger, it will turn off the charging
- When the wireless charger output, if there are metal objects in the transmitting area, the red and blue lights of the wireless dharger will flash. If there is always a metal object in the transmitting area, the light will go out and enter standby within 35 seconds.
- The power bank supports wireless charging for devices that comply with the Q standard protocol. The magnetic design is mainly designed for iPhone 12 series or 13 series, which can be automatically adsorbed after it is placed, and wirelessly charged by pressing the power button.
- In order to make the wireless charging work properly, we would like to make a few suggestions for you.
- When using the wireless charger try to remove the protective phone case or the phone case does not more than 2mm.
- The wireless charging location of the phone does not have metal or other thing covered.
- Please note: The magnetic design is only for the iPhone 12 series or 13 series.
SPECIFICATION
Product Care & Use
- Keep away from liquids, fire and extreme heat.
- Do not charge your devices while charging the power bank.
- Charge your T1151 at least once every 3 months
- Dispose of battery according to local environmental law.
- Do not disassemble by yourself.
- Avoid dropping.
Customer Service
For questions, support, or warranty claims, contact us at the address below
with your order number and product model number [email protected] Please
note, VRURC can only provide after-sales service for products purchased
directly from VRURC. If you have purchased from a different seller, please
contact them directly for service or warranty issues. 12-month limited
warranty https://www.vrurcpower.com
[email protected] The Waste Electrical and
Electronic Equipment Directive (WEEE Directive) is the European Community
directive on waste electrical and electronic equipment, which became European
law in February 2003. The main purpose of this directive is to prevent
electronic waste. Recycling and other forms of waste recovery should be
encouraged to reduce waste. The symbol (trash can) on the product and on the
packing means that used electrical and electronic products should not be
disposed of with general household waste. It is your responsibility to dispose
of all your electronic or electrical waste at designated collection points.
Disposing of this product correctly will help to save valuable resources and
it is a significant contribution to protect our environment as well as human
health. For more information about the correct disposal of electrical and
electronic equipment, recycling and collection points please contact your
local authorities, waste management companies, your retailer or the
manufacturer of this device.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.