Velleman EMDIN03 3 PHASE – 7 MODULE DIN RAIL MOUNT kWh METER User Manual

: June 5, 2024
: Velleman

Table of Contents

Safety instructions
Description
Features
Installation
Technical Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EMDIN03

USER MANUAL

Velleman EMDIN03 3 PHASE 7 MODULE DIN RAIL MOUNT kWh METER -
fig

To all residents of the European Union
Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to our distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Safety instructions

| Read and understand this manual and all safety signs before using this appliance.
---|---
| Class II equipment.
****| For indoor use only.
| Overvoltage category III.

This device can be used by children aged 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
A qualified technician should install and service this device.
The measurements provided by this device are for information purposes only.

Description

Three-phase four-wire electronic watt-hour meter with pulse counting output. Very accurate, reliable, light, and compact device. Connection diagram: see page 2.

Features

LCD display (with blue backlight)
pulse output
LED indicator

Note:

LEDs A, B, and C light when L1 A/L2 B/L3 C are actively connected.
The pulse counting output terminal port (internal test point) is only intended for testing purposes (manufacturer). It is not for connecting real-time to other equipment (installation).

Installation

This device must be mounted on a DIN rail.
Interconnection to accessories and other equipment
Direct type, no interconnection to other equipment.
Reset
This device does not have a reset function.

Technical Specifications

dimensions	7 modules DIN-RAIL
voltage	3 x 230 / 400 V
current	3×5(100)A
accuracy class	1.0
frequency	50 / 60 Hz
display mode	LCD 6+1 = 999999.9 kWh
power consumption	≤ 2 W (10 VA)
temperature range	-20 to 55 °C
max. operating altitude LED indicator	2000 m
pulse output	1 blink per pulse
800 imp/kWh
voltage: 12 to 27 V
current: 27 mA
impulse width: 90 ms

(1) 3×5(100)A: 3×5 → (Ib = 5 A) and (100) → I max = 100 A.
The internal measurement always happens at 3×5 A (Ib) (5A per phase), via an internal voltage divider. For example, a live current of 25 or 32 A flows through the circuit. The max current for this kWh meter may be 100 A (I max) per phase.
Note: the most accurate measurement for these kWh meters, is by a live current of 5 A through the circuit.

Use this device with original accessories only. Velleman Group NV cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our websitewww.velleman.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group NV.
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated, or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfill strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organizations. If, all precautionary measures notwithstanding, problems should occur, please make an appeal to our warranty (see guarantee conditions).
General Warranty Conditions Concerning Consumer Products (for EU):

All consumer products are subject to a 24- month warranty on production flaws and defective material from the original date of purchase.
Velleman® can decide to replace an article with an equivalent article or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
Not covered by warranty:
– all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
– consumable goods, parts, or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
– flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…
– flaws caused deliberately, negligently, or resulting from improper handling, negligent maintenance, abusive use, or use contrary to the manufacturer’s instructions;
– damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally); – damage resulting from an inappropriate packing and shipping of the article;
– all damage caused by modification, repair, or alteration performed by a third party without written permission by Velleman®.
Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
Hint: In order to save on cost and time, please re-read the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
Repairs occurring after warranty expiration are subject to shipping costs.
The above conditions are without prejudice to all commercial warranties.
The above enumeration is subject to modification according to the article (see article’s manual).