my audio pet B07CQDNSNZ Bluetooth Speaker User Guide

my audio pet B07CQDNSNZ Bluetooth Speaker User Guide

my audio pet B07CQDNSNZ Bluetooth Speaker

1. Speaker
2. Lanyard Anchor
3. Charging Pod (Micro USB)
4. Power On/Off
5. Play/Pause & Bluetooth
6. Next TrackNolume Up
7. Previous Track/Volume Down

Getting Started

1. Press and hold the @ Power Button until you hear the start-up tone.
2. Go to Settings on your device and activate Bluetooth.
3. Search for and select in your device options. You will hear a tone as your pet pairs with your device.
4. Play music, snap pies, SA.A$H, have funl

True Wireless Stereo Pairing (two Splash pets)

1. Select one of the pets to be the “lead” speaker by double clicking the 8) Play/ Pause button to activate lWS. You will hear a successful pairing tone.
2. To disconnect the paired speakers, doubleclick either of the 8) Play/Pause Buttons.

Play/Pause Button 8)

Press this button to pause or play audio.
Press and hold to disconnect from your device.

Volume Buttons (£) 0

The (£) and 0 buttons control the volume and also allow you to skip forward to the next song
or jump back to the previous song.
To skip to the next song, tap the ® button once; to jump back to the previous song, tap the 0 button once. To increase the volume, press and hold the ® button; to decrease the volume press and hold the 0 button

Auto Shut-off Feature

After 10 minutes of inactivity, your speaker will
power down automatically.

Low Battery Feature

When your battery is ready to be recharged, you will hear a tone 3 times every 15 seconds before the speaker turns off.

SelfieMode

To switch to Selfie Mode, tap the @ Power button. Your keyboard may be unavailable on your device while in this mode. Open the camera app on your device and press the
@ Power button to take picture.

LED Lights (located under waterproof cover)

• Flashing Blue: The speaker is in Bluetooth device search mode.
• Solid Blue: Successfully paired with device.
• Solid Red: In charging mode; Light will turn off when speaker is fully charged. Your speaker will continue to operate while charging.

Troubleshooting

I am having trouble connecting or using my speaker(s). What do I do?
Most problems can be solved with a simple Bluetooth reset. Tum off the speaker(s), tum off the Bluetooth on your device for 30 seconds. and then tum it back on. Tum on the speaker(s).
Connect by selecting the speaker(s) on your Bluetooth list.

Splash pets are very loyal

If you are still unable to connect, you may need to disconnect the speaker from a previously paired device within Bluetooth range. Once disconnected, try to pair again with the new device.

I can only get one speaker to play. How do I pair two speakers to play in TWS mode?
Tum off the speakers, disconnect and forget them from your device, and follow the True
Wireless Stereo Pairing instructions again. If you are still having difficulty, try the following:

1. Tum Bluetooth off, and then tum it on again.
2. Make sure both of the speakers(s) are completely disconnected from all previously connected Bluetooth devices.
3. Follow the True Wireless Stereo Pairing instructions.
4. Connect to your Bluetooth device.

FCC Warning Statement

Changes or modif ications not expressly approved by the party responsible for compliance could void t he user’s aut horit y to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WATERPROOF

My Audio Pet SPLASH speakers come with an IPX7 rating and are able to withstand being underwater up to 3 feet / 1 meter for up to 30 minutes.

SPECIFICATIONS

Loudspeaker Output 5W RMS
Battery 1000 mAh
Bluetooth Version 5.0
Bluetooth Range 33ft / 1 Om
Playback Time 6 – 8 hours
Charging Time Approx 2 hours
Cable Connection Micro USB

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>