Shenzhen Mengxin Chuangfu Industrial MXC2-300M Repeater Installation Guide
- June 5, 2024
- Shenzhen Mengxin Chuangfu Industrial
Table of Contents
Shenzhen Mengxin Chuangfu Industrial MXC2-300M Repeater
Product Overview
This Wireless-N Repeater is designed specifically for small business, office, and home network requirements and has combined wired and wireless network connections. It complies with the IEEE802.11N standard. It also works well with other wireless products with IEEE802.11b/g/n protocol. It creates an instant WiFi hotspot at any location where you have an internet connection.
Main Features:
Comply with IEEE802.11B/G/N standards; Supports Repeater Mode, AP Mode, Router Mode Compact and portable, provide powerful wireless signal; Travel size design, ideal for home and travel use.
Package Contains
- WiFi Range Extender
- Quick Installation Guide
S1 : Connect to WiFi: On your phone or computer connected to the wifi named “BETA.IOT_xxxx” Note: XXXX is the last four digits of the equipment MAC address.
Log in to the admin page: Open the browser and type the IP address:
192.168.188.1 in the address bar, password is < admin.
Click the < Connect to> column, your available network list will appear,
Please select your home wifi name, the one you need to extend. S3.3: Type your
home wifi password in 
Wireless Network Setup: S4: After login to the main interface, please click
the button to set your WiFi SSID and Password. Click <SAVE&APPLY> and wait for
its configuration. After finished, please re-connect to the new WiFi and get
access to the internet. NOTE: If you forget the wifi password or administrator
password, please reset the device.
FQA
-
Why unable to enter into the IP address 192.168.188.1?
A: (1) Before you enter the IP address, please make sure you have connected to the wifi “BETA.IOT_Xxxx” first.
(2)Please don’t click ” Google Search”. -
After setting it to Repeater Mode, why there is no internet connection?
A: That’s because in Step S3.3, you typed the wrong password. You need to type your home wifi password after you selected your home wifi signal. -
What should I do if the wifi speed gets slow after using it for several months?
A: Please unplug the device from the socket, wait for 3 minutes then re-plug it again. -
Where I should place it if I set it to Repeater Mode?
A: Please place it halfway between your home router and the no-signal area. Please keep it away from the heavy or bearing walls. -
How to reset the wifi repeater?
A: (1) While connecting to this WiFi Repeater’s signal, please enter into setup page 192.168.188.1 and click < REBOOT > to reboot it. (2) If unable to enter into IP address, please use a needle to press and hold the reset button (the tiny hole) for 10 seconds then release it. You will see the WiFi LED changing off and then flashing again. If you don’t see the WiFi LED, please wait for 40 seconds. -
lf you meet the below issues, please reset or reboot the device:
-
Unable to find the default SSID of this wifi repeater
-
Unable to operate on the setup page
-
Want to change the setting
-
WiFi LED is on steady
-
their unable to solve issues.
-
If you have any problems with the product, please contact us via email: beta. iotus@outlook.com
FCC Statment
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.