STM Goods 810046110010 Powerkick Smarter Wireless Charging User Guide
- June 5, 2024
- STM Goods
Table of Contents
810046110010 Powerkick Smarter Wireless Charging
10000 mAh capacity
Portable wireless Powerbank
Attaches to phone while charging
Kickstand allows device
kickstand
for landscape or portrait mode while charging
suction cups
secure PowerKick to your phone
Qi-certified
to power up wireless charging-enabled devices
easy connect
charge wirelessly or plugin any device via USB-A or USB-C port
*device must be wireless charging enabled viewing while charging
power button
| 25% | 50% | 75% | 100% |
|---|---|---|---|
PowerKick power indicator
Wireless charging indicator light
- Please note that for optimal wireless charging the phone must be within 5mm of the charger. Cases thicker than 5mm and any metal placed between the phone and the charger will stop the charging process.
CHARGING LIGHT INDICATOR
PowerKick is fully charged when all 4 indicator lights are on
Press power button to check power level and to activate charging.
To charge the PowerKick, plug the USB-C end of the cable into the PowerKick
and the other end into the USB-A port on an 18W wall plug for maximum charging
speed (wall plug not included).
Charge your devices wirelessly* or with cables (USB-A or USB-C)
10,000 mAh lithium polymer battery (charge smartphone approx. 2.2 times*)
Suction cups conveniently secure PowerKick to your phone for consistent
charging
Kickstand props your device in landscape or portrait while charging
device must be wireless charging enabled
**pbased on an iPhone 11 Pro battery capacity
Included- 1 x 10,000 mAh Powerkick. 1 x USB-A to USB-C cable
2 year warranty
STMGOODS.COM
PKG-931-217Z01:1
Made in China
TECHNICAL SPECS
Type-C Input: DC 5V/2.5A, 9V/2A
Output (USB-A, Type-C): DC 5V/3A, 9V/2A, 12V/1.5A
Wireless output: Up to 1OW
STM-PowerKick Blister structure-V3
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>