Bienvenue A1912RGBCW LED Desk Lamp User Manual
- June 5, 2024
- Bienvenue
Table of Contents
Bienvenue A1912RGBCW LED Desk Lamp
Get started
-
Download the Globe Suite app from the App Store or Google Play to your mobile device
-
Launch the Globe Suite “” app.
-
To register, enter your mobile phone number or email address. Create a password, then login to the app.
OR -
Login if you already have an account.
Verify your network
- Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel.
- Consult your router documentation for detailed instructions on how to change wireless settings.
- Once your devices have been successfully paired, you can switch back to mixed mode or use a cellular data network to control your smart products.
Add a Device
- Insert your smart bulb.
- Select the “+” symbol on the top right hand corner.
- Select smart bulb and follow the instructions within the app.
- If the connection fails, try using Ap mode.
Add a Device : AP mode
- On the “Add a device “page select the instructions within the app.
- you’re good to go!
Setup voice assistance
- Instructions in the Globe Suite TM app: Select “Profile”, select “Integration”, choose your voice assistant, and follow instructions.
Did you know?
Most modern routers are dual band meaning they support both 2.4 GHz and 5 GHz channels.
The most common wireless options are:
- Mixed: The router will broadcast both 2.4 GHz and 5 GHz simultaneously under the same SSID.The device will choose which to congection based on multiple variables (congestion, distance to router etc.).
- 2.4 GHz: Broadcast only on this channel.
- 5 GHz: Broadcast only on this channel
- Dual 2.4 and 5 GHz using Separate SSIDs: Router will broadcast both channels and the user manually decides which to connect to.
Have a question? We can help!
- www.globe-electric.com/smart
- [email protected]
- Visit the FAQ page in the app
- Check us out on YouTube
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body. This equipment meets the exemption from the routine evaluation
limits in section 2.5 of RSS-102. It should be
installed and operated with a minimum distance of 20cm between the radiator
and any part of your body.
FCC Warning
This device complies with Pat 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.