Shenzhen Hengbida Electronic Technology XF3 Bluetooth AI Translation Stick User Manual

Shenzhen Hengbida Electronic Technology XF3 Bluetooth AI Translation

Stick

Product Function Description

Download and connect to the app

1. Scan the QR code below with your mobile phone to install the translation and communication APP
2. Open the mobile APP and register an account with the mobile account to log in.
3. Follow the operation steps to complete the connection with the translation stick.
4. Main: Location/Bluetooth/Microphone /Notification and other permissions need to be selected and allowed IOS system mobile phone needs to manually connect to the Bluetooth device prefixed with AUD in the Bluetooth settings.

Switch machine

Press and hold the power button to switch the translation stick.

Dialogue translation

1. Press and hold the A key to speak, and release it to translate the language corresponding to the A key in the APP.
2. Press and hold the B key to speak, and release it to translate the language corresponding to the APPB middle key.

Language switch selection

Please switch the language at the top of the APP

Repeat

Short press the M button to play and repeat the last translation content, and you can listen to the repeat while following it.

AI assistant

Long press the M button to enter the AI assistant function, which can conduct encyclopedia questions and answers, play nursery rhymes, listen to opera comics, and more than 40 AI artificial intelligence skills. How to use: Long press the M key to speak the question you need to know, and after releasing it, the corresponding answer or corresponding audio content will be played.

Volume addition and subtraction

1. Short press the A button to increase the volume;
2. Short press the B button to decrease the volume.

State of work light

1. The red light is on in the charging state.
2. The blue light is on after fully charged.
3. The red light flashes in the low power state.
4. The blue light keeps flashing slowly when the Bluetooth is not connected when the device is turned on.
5. The blue light goes out after successful Bluetooth connection.
6. Turn off the voice broadcast without lighting.
7. Press the A/B button to pick up the sound and turn on the blue light, let go and start translating and turn off the light.
8. To repeat the last sentence, press the M button and the blue light will flash once to start repeating.

Troubleshooting

The translation stick often disconnects from the phone

1. Switch the Bluetooth of the mobile phone again.
2. Close the APP in the background and reopen it.
3. Try to connect the translation stick after restarting the phone.

The translation stick is silent after connecting to the app

1.  Please turn the phone and translation stick to the maximum;
2. (IOS) Please go to the Bluetooth settings and confirm that the AUD Bluetooth device has been connected, and the audio data needs to be connected to transfer to the translation stick.

Can not boot

Check whether the battery is exhausted, connect the charger and charge it for 2 minutes and check whether the red light is on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>