B08H1GKS7Y Niwa Grow Hub User Manual
- June 5, 2024
- Niwa
Table of Contents
B08H1GKS7Y Niwa Grow Hub
Introduction
The Niwa HUB revolutionizes all traditional power strips. Users have the ability to remotely control the individual outlets from App and read temperature, humidity and light levels.
Main Features
Easy To Setup -Plug into existing outlet, follow the set up instructions on
the App ,name your device , and you are good to go.
Control from anywhere-Stay connected even when you’re not at home. Control
your electronics with the free Connected app, from anywhere.
Independently Control Each Outlet-Each outlet could be controlled
independently, as well as the 4 USB ports
Surge And Overload Protection-Protect sensitive electronics and appliances
from sudden short circuit and power surges that can occur during weather
storms and cause irreparable damage.
Specifications
|
---|---
Input| 10A AC125V 50/60Hz
Output| 15A Resistive
125V Max 1875W
Max Load| 15A in total
Overload Protection| YES
Surge Protection| YES
WiFi network| 2.4G b/n/g
Operating Temperature And Humidity| -10ºC ~ 55ºC
10%~90%RH, Non-condensing
Hardware Overview
- Main Switch
- Outlet
- USB port
- WiFi network indicator
- Power indicator
Download the App
- Search the keyword “Niwa Grow Hub” in APP Store or Google Play to download the App,
- Open the App and register an account to log in.
WiFi Setup
Note: Only 2.4 GHz b/g/n networks supported
- Tap the add icon “+” on the top right and select “Grow Hub” from the device type list.
- Press and hold the “Main Switch” for 5s and release until the indicator light is rapidly flashing that indicates the switch is ready to configure.
- Enter the password of the WIFI network that your mobile device connected, then it will start registering the device to the cloud.
- Once the device was added successfully, you will be able to quickly control it within the App.
FCC Requirement
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.