AIRLOOP ALSNAPL Waterproof Sports User Manual

AIRLOOP ALSNAPL Waterproof Sports

PACKING LIST

DIAGRAM

HOW TO WEAR

1. Select your size
   Mix and match for a perfect fit and audio performance

2. ttach eartlps and earwings

3. Wear in your ears
   Put the earbuds in your ears. Rotate the body of the earbuds towards your ear lobe until they stop.

CHARGE

The earbuds are to be charged in the charging case, but the neckband(optional) and sportband(optional) can power the earbuds when the earphone is low on power.

POWER ON

1. When taken out from the charging case, the earbuds automatically trun on.
2. If the earbuds are not in the charging case, just keep pressing the MFB button for 2s on the L&R earbud to power on.

PAIRING

1. When taken out from the charging case, the earbuds automatically start pairing (with the red and blue LED light flashing quickly on the left or right earbud).
2. Turn it on by pressing the “L&R” MFB button, then click the”L/R” Logo button to enter into pairing mode with the red and blue LED light flashing quickly. Next, select “AirLoop Snap” on your phone.
3. If one phone is connected with your earbuds, you will have to turn off this phone’s Bluetooth function before pairing with another Bluetooth-enabled phone.
   • Right after the left earbud is connected, a pop up window will appear on your phone. Click “Pair”, and the right earbud is paired with the phone to complete the connection.
   • Done! Only one of them will be connected to the phone each time they are used, and both of them can work synchronously.

MUSIC

Volume Up/Down

• Volume + press and hold the MFB button of Right
• earbud to turn up the volume increasingly.
• Volume press and hold the MFB button of Left
• earbud to turn down the volume decreasingly.

Next/Previous Track

1. Double click the MFB button on the Right earbud for the next track.
2. Double click the MFB button on the Left earbud for the previous track.

Play/Pause

1. Click the MFB button on the Right or Left earbud once.
2. Remove the earphone from the ear to pause.

INCOMING CALL

• Answer/Hang up
  To answer or hang up, click the MFB button on the Right or Left earbud once.

• Reject
  Press the MFB button on the Right or Left earbud for 2s.

• Srl
  Triple-click MFB button on the Right or left earbud.

POWER OFF

1. Return the earbuds into the charging case, and they’ll automatically shut down.
2. If the earbuds are not in the charging case, just keep pressing the Logo button for 5s on the L&R earbud to power off.

CORRECT

(Waste Electrical & Electronic Equipment) This Marking shown on the product or its literature indicates that it should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>