Iridium 9690 Edge Pro Standalone satellite device User Manual

9690 Edge Pro Standalone satellite device

9690 Edge Pro Standalone satellite device
User Manual

Legal Notices

This User Manual provides useful information and is provided “as is.” Iridium and its affiliated companies, directors, officers, employees, agents, trustees, or consultants (“Iridium”) assume no responsibility for any typographical, technical, content, or other inaccuracies in this User Manual.
Iridium reserves the right to revise this User Manual or withdraw it at any time without prior notice.
You can find the current version of this Iridium Edge® Pro User Manual at
https://www.iridium.com/resources/?fwp_resource_categories=product-manual.

Prior to using the Iridium Edge Pro, read and understand this User Manual including the safety warnings and information. Failure to do so could result in serious injury or death.
IRIDIUM MAKES NO REPRESENTATIONS, GUARANTEES, CONDITIONS, OR WARRANTIES, EITHER EXPRESS OR IMPLIED,  INCLUDING WITHOUT LIMITATION, ANY IMPLIED REPRESENTATIONS, GUARANTEES, CONDITIONS, OR WARRANTIES OF  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, SATISFACTORY QUALITY, NON- INTERFERENCE, ACCURACY OF INFORMATIONAL CONTENT, OR ARISING FROM A COURSE OF DEALING, LAW, USAGE, OR  TRADE PRACTICE, USE, OR RELATED TO THE PERFORMANCE OR NONPERFORMANCE OF ANY PRODUCTS, ACCESSORIES,  FACILITIES, SERVICES OR USER INFORMATION, EXCEPT AS EXPRESSLY STATED IN THE LIMITED WARRANTY. ANY OTHER STANDARDS OF PERFORMANCE, GUARANTEES, CONDITIONS, AND WARRANTIES ARE HEREBY EXPRESSLY EXCLUDED AND  DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. THIS DISCLAIMER AND EXCLUSION SHALL APPLY EVEN IF THE EXPRESS LIMITED WARRANTY CONTAINED IN THIS USER MANUAL FAILS IN ITS ESSENTIAL PURPOSE. FURTHER, THIS LIMITED  WARRANTY COVERS THE IRIDIUM EDGE PRO (INCLUDING HARDWARE, SOFTWARE, AND/OR FIRMWARE) AND ACCESSORIES  ONLY, AND NO WARRANTY IS MADE AS TO USER INFORMATION AND/OR COVERAGE, AVAILABILITY, OR GRADE OF SERVICE  PROVIDED BY IRIDIUM SEPARATELY FOR IRIDIUM® SATELLITE SERVICES.
IN NO EVENT SHALL IRIDIUM BE LIABLE, WHETHER IN CONTRACT OR TORT OR ANY OTHER LEGAL THEORY, INCLUDING  WITHOUT LIMITATION STRICT LIABILITY, GROSS NEGLIGENCE, OR NEGLIGENCE, FOR ANY DAMAGES IN EXCESS OF THE  PURCHASE PRICE OF THE IRIDIUM EDGE PRO (INCLUDING HARDWARE, SOFTWARE AND/OR FIRMWARE) AND/OR ACCESSORIES  AND/OR THE COST OF IRIDIUM SATELLITE SERVICES PROVIDED. NOR SHALL IRIDIUM BE LIABLE FOR ANY  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF PRIVACY, LOSS OF USE, LOSS OF TIME OR INCONVENIENCE, LOSS OF INFORMATION OR  DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS CAUSED BY THE IRIDIUM EDGE PRO (INCLUDING  HARDWARE, SOFTWARE AND/OR FIRMWARE) AND/OR ACCESSORIES AND/OR THE IRIDIUM SATELLITE SERVICES, OR ARISING  OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE IRIDIUM EDGE PRO (INCLUDING HARDWARE,  SOFTWARE AND/OR FIRMWARE) AND/OR ACCESSORIES AND/OR THE IRIDIUM SATELLITE SERVICES TO THE FULLEST EXTENT  THESE DAMAGES MAY BE DISCLAIMED BY LAW AND REGARDLESS OF WHETHER IRIDIUM WAS ADVISED OF THE POSSIBILITIES  OF SUCH DAMAGES.

Third-Party Information
This User Manual might refer to third-party sources of information, hardware or software, products or services, and/or third-party websites (“third-party information”). Iridium does not control and is not responsible for, any third- party information, including without limitation the content, accuracy, copyright compliance, compatibility, performance, trustworthiness, legality, decency, links, or any other aspect of third-party information. The inclusion of such a third party, the information does not imply endorsement by Iridium of the third party information. ANY THIRD PARTY INFORMATION THAT  IS PROVIDED WITH IRIDIUM’S FACILITIES, SERVICES, PRODUCTS, OR USER INFORMATION IS PROVIDED “AS IS.” IRIDIUM MAKES  NO REPRESENTATIONS, GUARANTEES OR WARRANTIES IN RELATION TO THIRD-PARTY INFORMATION AND IRIDIUM SHALL  NOT BE LIABLE FOR ANY LOSSES, DAMAGES, LIABILITIES, JUDGMENTS, FINES, AMOUNTS PAID IN SETTLEMENT, EXPENSES OR  COSTS OF DEFENSE SUSTAINED IN RELATION TO ANY SUCH THIRD PARTY

INFORMATION.

Intellectual Property, Trade Secret, Proprietary or Copyrighted Information
To protect Iridium proprietary and confidential information and/or trade secrets, this User Manual may describe some aspects of Iridium technology in generalized terms. Iridium products may include copyrighted Iridium and third- party software. Any such copyrighted software contained in Iridium products may not be modified, reverse engineered, distributed, or reproduced in any manner to the extent provided by law. The purchase of any Iridium  products shall not be deemed to grant either directly or by implication or otherwise, any license under copyrights, patents, or patent applications of Iridium  or any third party software provider, except for the normal, nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product.

Content Copyright
You are exclusively responsible for the use of the User Manual, including the proper use of third-party copyrighted materials. If you violate these terms you agree to defend, indemnify and hold Iridium harmless with respect to any claims or actions by third parties related to your improper use of copyrighted materials and to pay all costs, damages, fines, and other amounts incurred by Iridium, or on its behalf, in the defense of any such claims or actions.

Privacy and Data Security
Iridium is committed to protecting the privacy and security of the users of Iridium products. The Iridium Edge Pro is not designed nor intended to allow personally identifiable information to be transferred from the product to Iridium. For the avoidance of doubt, users of Iridium products should not furnish or otherwise provide Iridium with any personally identifiable information without Iridium’s express written consent. Notwithstanding the foregoing, users of Iridium products should be aware that certain Service Providers may amend or alter Iridium products, combine Iridium products with other third-party products, or offer other services in which the Service Providers may collect or have access to the personally identifiable information related to the users of  Iridium products. In such circumstances, the applicable Service Provider is solely responsible for the manner in which it collects and processes personally identifiable information, and Iridium does not endorse or otherwise approve such data processing activities and will not be liable for the same. The products described in this User Manual use network-based positioning technology, which may be used to obtain a user’s approximate location and thereby affect a user’s privacy. The users of Iridium products are solely responsible for ensuring that any network or internet activity, and any applicable username and password, related to the operation of, and access to, the products are secure. The users of Iridium products are solely responsible for regulating and
preventing unauthorized access to the products or data pertaining to any product’s usage, operation or end users.

Disclosure to Governmental and Quasi-Governmental Agencies.
By your use of the device and Iridium satellite services you acknowledge and consent to Iridium’s disclosure of user information, including but not limited to name, address, telephone number, and location information, including, where available, the geographic coordinates of equipment, to governmental and quasi- governmental agencies where Iridium deems it necessary in its sole discretion, including but not limited to responding to an exigent circumstance.

Limited License to Software/Firmware
The Iridium Edge Pro device contains software, including firmware and software made available by one or more third parties (the “Software.”) Each such  item of software is subject to the applicable terms and conditions (the “Software Terms”) available at
https://www.iridium.com/resources/?fwp_resource_categories=legal-notice.
Do not use the Iridium Edge Pro device until you have carefully read the Software Terms. Do not use the Iridium Edge Pro device if you do not wish to agree to the Software Terms. Your use of the Iridium Edge Pro Device constitutes your acceptance of all of the Software Terms. Without limiting the foregoing, if you do not agree to the Software Terms, you are not granted any license or rights whatsoever to use the software contained on the Iridium Edge Pro device.

Limited Warranty
Iridium and its Service Providers stand by the Iridium Edge Pro, and the Service Provider offers you a Limited Warranty which you should receive when you purchase the device. Please contact your Iridium Service Provider if you have any questions regarding repair or warranty. Do not contact Iridium.

Important Safety Information

Prior to using Iridium Edge® Pro, read and understand the Iridium Edge Pro User Manual including the safety warnings and information. Failure to do so could result in serious injury or death.

Installation

WARNING Always secure power cables. Failure to secure cables could result in fraying or failure of the power cable, resulting in fire and or failure of the device. These hazards could cause serious injury or death.
CAUTION Install the Iridium Edge Pro safely and securely. Failure to do so could result in dislodging of the Iridium Edge Pro, especially when operating
in areas of high winds or when mounted on moving vehicles, which could result in injury or damage.

Grounding

WARNING Properly ground the Iridium Edge Pro. Failure to properly ground the Iridium Edge Pro could cause unexpected currents, which could cause serious injury or death.

Power Cables

Use proper cables that have been supplied by a Service Provider. The use of improper cables can result in damages to equipment, property or persons.

WARNING Use power and ground conductors of proper gauge. The use of improper gauge power cables could result in exposing cables to excessive heat which could cause fire, resulting in serious injury or death.

Explosive Atmosphere / Blasting Areas

WARNING Power down or turn off the Iridium Edge Pro when in a “blasting area” or in areas posted “Turn off two-way radio.” Obey all signs and instructions. Failure to do so could result in serious injury or death.

WARNING Turn off the Iridium Edge Pro when in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks from your device in such areas could cause an explosion or fire resulting in serious injury or death.

External Fuse

NOTICE The Iridium Edge Pro must be powered through a properly-rated fuse or current-limited power supply. Failure to do so could cause large current drawings if unexpected or inadvertent shorts occur in either the Iridium Edge Pro device or its mating cable. Any large sustained current could result in damage to equipment.

Introduction

The Iridium Edge Pro supports a Java programmable platform that allows Iridium partners to program the Iridium Edge Pro to meet market-specific requirements. It consists of a power supply, dedicated Iridium antenna, dedicated GPS antenna, BLE, four configurable inputs/outputs, RS232, RS485, and  CAN bus in an environmentally sealed enclosure. It also contains an Iridium Short Burst Data® (SBD® ) modem which allows remote devices to send and receive satellite messages from anywhere in the world.
Iridium’s Service Providers typically sell complete solutions to meet a market requirement. For hardware, Iridium’s Service Providers typically bundle cables and other remote equipment with the specially programmed Iridium Edge Pro device. For services, Iridium Service Providers typically bundle Iridium’s satellite services with a backend application that sends and receives messages to Iridium’s gateway.
Development documentation and software development tools are available to qualified Iridium partners. Any Iridium partner interested in more information on the Iridium Edge Pro should contact their Iridium account manager.

Regulatory

Iridium Edge Pro is certified as Model #9690.

General Installation Safety Guidelines
Certifications in most regions, including the United States and Canada, require that the Iridium Edge
Pro be installed such that it is at least 20 cm (7.87 inches) away from persons.
Radio Frequency Radiation Safety Notices Radio Frequency Radiation Safety Notice and Other Information Required by the U.S. Federal  Communications Commission and Other Governments.
Users are advised that this device must not be collocated with or operated in conjunction with any other antenna or transmitter than the one contained in this device unless so permitted by the equipment authorization procedures of the U.S. Federal Communications Commission (FCC).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any unauthorized modifications or attachments could damage the Iridium Edge Pro and may violate FCC regulations and void your authority to operate the device.
Any modifications or attachments could damage the Iridium Edge Pro and may violate FCC regulations and void your authority to operate the device.
The device should be mounted horizontally so that the maximum power radiates directly upwards.
Installations, where the equipment is mounted at an angle of more than eighty degrees to the horizon, violate regulatory guidelines and are not permitted.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Radio Frequency Exposure Safety
The Iridium Edge Pro is not intended to be used in the vicinity of the human body. Users are advised to maintain at least 20 cm (7.87 inches) distance from the device when the device is in operation.
The device should only be used in a manner that minimizes the potential for human exposure.

Usage On Board Aircraft
The Iridium Edge Pro has not been qualified or tested for operation in aircraft. In the United States, the use of the device is subject to regulations including 47  C.F.R. 25.285(a), governing the use of the device only by the pilot or with pilot consent. Learn about all of the rules, regulations, and laws governing your use of the device before attempting to use it on an aircraft.

Industry Canada Notice Statements
This section contains Industry Canada (Innovation, Science, and Economic Development Canada) notice statements.

Antenna Statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

License Exempt
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

European Union
The Iridium Edge Pro conforms to European regulatory guidelines as per the Declaration of  Conformity found on2.6 European Union
The Iridium Edge Pro conforms to European regulatory guidelines as per the Declaration of Conformity found on www.iridium.com.

REACH ( European Union)
The Iridium Edge Pro has been tested to REACH directive 1907/2006.

Device Disposal
Proper device disposal is not only important for safety but also benefits the environment. Consumers should recycle used devices in accordance with applicable national, state, and or local laws and regulations. For EU users, Iridium Edge Pro falls under the EU’s WEEE directive which requires that all electrical and electronic products must be taken to separate collections. points at the end of their working life and must not be disposed of as unsorted municipal waste.

Environmental Specifications

Temperature
The temperature specifications for the Iridium Edge Pro are given in the table below.

Operating Temperature Range
( with SBD using reduced duty cycle)| -40 °C to + 85 °C
Storage Temperature Range| -40 °C to + 85 °C

Testing Compliance
The Iridium Edge Pro has been tested to the SAE J1455 specifications (March 2017) as per the following table.

figures 6, 7, and 8 in SAE J1455
Shock| SAE J1455| Drop 1 m onto concrete in 3 perpendicular orientations. 3 drops total.
Immersion Testing| SAE J1455, Section 4.3.3.2| 3 immersions
Cable mated during immersion
Humidity| SAE J1455, Section 4.2| Temperature Range: -40 to 85 °C Relative Humidity: 90%
Number Cycles: 30
Duration of Cycle: 8 hours
Chemical Splash Resistance| SAE J1455, Section 4.4.3.2| Brush method with selective fluids
Salt Spray Resistance| SAE J1455, Section 4.3.3.1| Duration of 96 hours
Dust and Steam
Cleaning| SAE J1455, Section 4.5.3| At level 4
Low-Pressure Storage| SAE J1455, Section 4.9.3| At -40 °C for 48 hours
Power Supply Testing| SAE J1455, Section 4.13.2.2.1| Load dump,
Inductive Switching, Burst Transients

Power and Mating Cables

Iridium Edge Pro power and mating are provided by Iridium Service Providers or Value Added Resellers. These cables and the installation instructions will vary depending on the Service Provider and the general market requirements include sensors and equipment that are connecting to the Iridium Edge Pro.
For all installation, the Iridium Edge Pro requires an input power of 7-32 VDC at its connector. Power supply voltages should not be measured at the power source as voltage drops can occur over long cables, especially during Iridium SBD transmissions.

Installation Instructions

Installer Qualifications
All installations must be done by an appropriately qualified installer who has been adequately trained.

IMEI Recording
Before an installation, the Iridium Edge Pro’s IMEI number should be recorded along with the installation location. The Iridium Edge Pro’s IMEI number is the network address for the Iridium Edge Pro and it is used for provisioning, billing, and for sending/ receiving messages.
The IMEI number is located on the bottom of the Iridium Edge Pro as per Figure 6-1.

IMEI Recording
Before an installation, the Iridium Edge Pro’s IMEI number should be recorded along with the installation location. The Iridium Edge Pro’s IMEI number is the network address for the Iridium Edge Pro and it is used for provisioning, billing, and for sending/ receiving messages.
The IMEI number is located on the bottom of the Iridium Edge  Pro as per Figure 6-1.

The Iridium Edge Pro includes an additional IMEI label in the gift box as per Figure 6-2. If the Iridium Edge Pro is mounted in a difficult-to-reach place or if its IMEI label is covered, the spare IMEI label can be optionally affixed to an accessible location to make it easier for maintenance personnel to read the IMEI.

Select Cables
Only use cables that meet the Iridium Edge Pro’s cable specifications and local regulatory codes.
All cables used to install the Iridium Edge Pro should be fabricated by a qualified cable assembly shop.
Use proper cables. The use of improper cables can result in damages to equipment, property, or persons.

Use power and ground conductors of proper gauge. The use of improper gauge power cables could result in exposing cables to excessive heat which could cause fire, resulting in serious injury or death.

Power Source
For all installations ensure that the power source

• Meets all local electrical and regulatory codes.
• Complies with the input voltage and maximum current specification of the Iridium Edge Pro listed on the label. Never connect the Iridium Edge Pro to an AC power source.

Fuse Location
The Iridium Edge Pro should always be powered through a suitably rated quick- trip fuse. The fuse should be located close to the power source.

NOTICE The Iridium Edge Pro must be powered through a properly-rated fuse or current limited power supply. Failure to do so could cause large current drawings if unexpected or inadvertent shorts occur in either the Iridium Edge Pro device or its mating cable. Any large sustained current could result in damage to equipment.

For some installations, a vehicle’s fuse may be suitable. In this case, find the location of the fuse panel and ensure the cable you have is long enough to reach from the panel to the mounting location of the Iridium Edge Pro device. Iridium recommends consulting the vehicle’s owner’s manual to determine an appropriate circuit and to ensure that the fuse is adequate for the Iridium Edge Pro.

Select a Mounting Location
The mounting location is critical to ensure a safe installation and reliable operation. Ensure that the mounting location has enough space to accommodate the Connector Cover.  The Connector Cover should be used whenever possible, especially for installations that experience strong blowing winds and rain.
For reliable operation and optimal satellite performance, the installer should consider the following guidelines:

• Make sure that the mounting location provides a clear unobstructed 360-degree view of the sky in all directions. Typically, this means selecting a mounting location that is on top of an asset.
• The location must provide a safe and secure installation.
• The Iridium Edge Pro is not intended to be operated near a person. Always ensure that the Iridium Edge Pro is mounted more than 20 cm from persons in the general public for compliance with RF exposure limits.
• Select a rigid, stable flat surface, with a horizontal mounting location for optimal uniform satellite performance. If necessary, use a mounting bracket or other suitable  support.
• Do not install the Iridium Edge Pro inside a building or under metal surfaces.
• Make certain that the mounting location will not heat up the Iridium Edge Pro causing its temperature to exceed the maximum operating temperature. Consider an insulating material if the mounting surface can get hot.
• Never mount the Iridium Edge Pro close to any other communication equipment or antennas.
• Never install the Iridium Edge Pro in a location where water can collect.
• Never install the Iridium Edge Pro near an exhaust which can deposit fumes and carbon which can affect satellite operation.

Mounting the Iridium Edge Pro
The Iridium Edge Pro has four mounting holes designed to accommodate M4 (8-32) fasteners

Recommend Tools and Materials
The following tools and materials, not shipped with the Iridium Edge Pro, are typically required for installing the Iridium Edge Pro.

• Screwdriver, hex key, socket set, or a wrench for M4 (8-32) size fasteners
• 4 x M4 (8-32) stainless steel screws and nuts. The screw length depends on the thickness of your mounting surface. Round, socket, or hex head screws may be used. A wrench will have to be used for a hex head fastener.
• Drill and a 5.5 mm (7/32 inch) drill bit.
• Mating cable
• Dielectric grease (e.g. Silicone lubricant)
• Optional: Waterproof sealing compound such as RTV silicone.

In addition, the installer needs to provide all mounting hardware and screw fasteners. Screw fastener selection is installation specific and depends on the mounting surface material and thickness.

Drilling
In cases where a mounting bracket is not used, the Iridium Edge Pro may be mounted directly on an asset. A drill template is provided in the appendix if drilling is required.

Mounting

Install the Iridium Edge Pro safely and securely. Failure to do so could result in dislodging of the Iridium Edge Pro, especially when operating in areas of high winds or when mounted on moving vehicles, which could result in injury or damage.

Follow the following steps to attach the Iridium Edge Pro to its mounting surface.

• If you are using the connector cover, insert mounting screws in the back two mounting holes on the device first and tighten the screws and nuts.

• Iridium recommends applying dielectric grease to the male pins on the device connector.
  Then screw the mating cable onto the Iridium Edge Pro so that it is finger tight. Do not use a wrench to tighten the cable’s mating connector to the Iridium Edge Pro.

• Place the connector cover over the mating cable connector. Align the two holes on the connector cover with the front two device mounting holes. Refer to Figure 6-3 for an exploded view depicting the installation.

• Secure all mounting nuts with an appropriate thread locker that meets the installation requirements for factors such as vibration and temperature.

• Optionally use silicon sealant around the connector cover to improve the protection of the connectors

Cable Routing
When routing the Iridium Edge Pro’s mating cable be sure to

• Adequately secure and strain-relieve the cable.
• Do not bend the cable excessively around sharp corners and violate the bend radius specification.
• Route or protect the cable to avoid damages against persons walking or tripping.
• Connect the cable securely to the power supply return ground, close to the power source.
  The ground connection must be connected prior to connecting power to the device.

Properly ground the Iridium Edge Pro. Failure to properly ground the Iridium Edge Pro could cause unexpected currents, which could cause serious injury or death.

• Ensure that the Iridium Edge Pro is connected to the power source through a quick tripping fuse. The fuse should be located close to the power source.
• Secure all cables including the Iridium Edge Pro’s pigtail cable.

Always secure power cables. Failure to secure cables could result in fraying or failure of the power cable, resulting in fire and/or failure of the device. These hazards could cause serious injury or death.

Blasting Areas
The Iridium Edge Pro contains a transmitter and it must be considered a two- way radio in blasting areas. If the Iridium Edge Pro is to be occasionally deployed in blasting areas, ensure that operators and users are properly trained.

Power down or turn off the Iridium Edge Pro when in a “blasting area” or in areas posted “Turn off two-way radio.” Obey all signs and instructions. Failure to do so could result in serious injury or death.

Hazardous Locations
Ensure that the Iridium Edge Pro is not installed in hazardous locations or deployed on assets that can enter hazardous locations. The Iridium Edge Pro is not currently approved for operation in hazardous locations with potentially explosive atmospheres.

Turn your device OFF in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks from your device in such areas could cause an explosion or fire resulting in serious injury or death.

Painting
Never paint the Iridium Edge Pro. Paint could negatively affect the Iridium Edge Pro’s satellite performance. Further, painting voids all warranties.

Cleaning
Only use mild soaps or detergents to clean the Iridium Edge Pro.

Appendix A: Drill Template

The following Appendix contains a drill template for the Iridium Edge Pro.

© 2020 Iridium Satellite LLC. Iridium Edgetand the Iridium Logo have registered trademarks of Iridium Satellite LLC and its affiliates. All other trademarks, service marks, and logos are the property of their respective holders, which have not endorsed, sponsored, or otherwise affiliated with Iridium.

1750 Tysons Boulevard, Suite 1400 McLean, VA 22102 USA
Toll Free: +1 866.947.4348 (US Only) International: +1 480.752.5155  E‐Mail: [email protected] 

References

• Iridium Satellite Communications | Your World. Our Network.
• Download Resources | Iridium Satellite Communications
• Download Resources | Iridium Satellite Communications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>