Qijia C1001 Sports Headphone User Manual
- June 5, 2024
- Qijia
Table of Contents
Qijia C1001 Sports Headphone User Manual
Instruction Manual
-
Pair and connect
Pairing name: BluetoothMusic
Pairing method: the red and blue lights double flash after power on, the
headphone light goes out after connecting to the phone
Power on prompt tone: power on Shut down sound: shut down Pairing status
prompt: paired
Connection prompt tone: connected Low battery warning tone: low power
Button function: Long press to turn on/off; Short press “+” to increase the
volume,short press “-” to decrease the volume; Long press for 1 second “+”
next song, long press 1 second “-” previous song.
No operation standby: automatic shutdown after 3 minutes.
- Ready to pair
Activate the Bluetooth function on the phone, and then use the phone’s settings to add/search/discover new Bluetooth devices. iphone: Settings>Bluetooth>Enable>Search>Select the found “Bluetooth Music” name to pair.
- Setting
For the first use, press and hold the power button for 5 seconds. At this
time, the red and blue lights flash alternately, and the headset will
automatically enter the pairing state
Pair the new device, turn on the Bluetooth headset when the headset is off,
and then press and hold the power button for 5 seconds. At this time, the red
and blue lights flash alternately, and the headset will automatically enter
the pairing state.
-
Precautions
The headset has a built-in rechargeable lithium-ion battery. When using the
headset for the first time, we recommend that the battery be fully charged.
When charging, the indicator light is red, the charging time is about 2 hours,
and the full indicator light is blue.
When the headset battery is low, the red indicator light will flash with voice
prompts.
-
Specification:
Bluetooth version: 5.0+EDR Battery capacity: 160Mah Talk time: about 15 hours
Playing time: about 18 hours Transmission distance: 10 meters Charging time: 2
hours
Frequency range: 2.400G-2.4835GHZ Support agreement: HES/HSP/AVRCP/A2D
Speaker sensitivity: 100±db, 16Ω titanium composite film
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any inter ference received, including interference that may cause undesired
Any Changes or modifications not expressly approved by the party responsible for complianc e could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digit al device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasona ble protection against harmful interference in
a residential installation. This equipment gene rates uses and can radiate
radio frequency energy and, if not installed and used in accordanc e with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equip ment does cause harmful interference to radio or
television reception, equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance wi th the instructions, may cause harmful interference to radio
communications. However, ther e is no guarantee that interference will not
occur in a particular installation. If this equipmen t does cause harmful
interference to radio or television reception,
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>