CALDWELL 1121933 E-Max Power Cords 22 dB Bluetooth Earbuds User Guide
- June 5, 2024
- CALDWELL
Table of Contents
CALDWELL 1121933 E-Max Power Cords 22 dB Bluetooth Earbuds
Start-up
-
Quick Start
-
Choose EarTips & EarWings
-
Semi-closed EarTips (They suit to do sports as allow you to notice the ambient sound.)
-
Memory Foam EarTips They suit for hearing protection in noisy environments.
-
EarWings (They secure earphones in place.)
Gently push the earbud into your ear canal and adjust the EarWing to fit yourself.
- How to Connect
Power off the earphones, then hold MFB for 5s to power on again and it will auto-trigger pairing mode. (Earphones will auto-trigger pairing mode upon any dis-connectivity with the current device.
On your cellphone, search for POWER CORDS and tap to connect. (Earphones will auto re-connect to the last device in the connectivity records if any.)
How to Charge
A low battery will be warned by tone. (LED will be solid red when charging and turn to blue once fully charged.)
Factory Setting
In power-off status, hold MFB 10s until LED blinks red and blue promptly.
General Functions
- Power-on: hold MFB for 1s(LED will turn blue for 1s)
- Power-off: POWER CORDS hold MFB for 3s(LED will turn red for 2s)
- Answer Call Tap MFB to answer an incoming call(LED blinks blue promptly).
- Ignore Call Hold MFB for 2s to ignore the incoming call.
- Mute on/off When calling, double-tap MFB to mute on/off
- Skip Track When playing, hold Vol+/- to skip track forward/backward.
- Volume Control When playing or calling or in ambient sound mode, tap Vol+/-.
- Play/Pause When playing, tap MFB to pause and tap it again to play
- Voice Assistant When standby, triple tap MFB to activate voice assistant(like Siri)
- Switch Audio Output When calling, hold MFB for 1s to switch the audio output between cellphone and earphones
Three-way Calling & Switch
Tap MFB to answer an incoming call from phone1. If another call is coming from phone2 in sync, tap MFB to put the first call on hold while activating the second one. Double-tap MFB to switch between an active call and held call. Hold MFB for 2s to ignore a call from phone 2 and keep the phone call on the phone1.
Features
With an advanced PiXart v5.0 Bluetooth chip, it is compatible with most digital devices
Shark fin stabilizer offers an extra secure wearing experience.
Mini body and lightweight(13.15g) make wearing experience cool and comfortable
Basic Parameters
- Bluetooth version: V5.0
- Model:
- Pairing name: POWER CORDS
- Charging time: approx. 2hr
- Weight: 13.15g
- Standby time: approx. 100hr
- Operation range: 10m
- Bluetooth profiles: HFP/A2DP/AVRCP
- Music time: approx. 6hr
- Battery capacity: 3.7V 74mAh
- Battery type: li-ion
- Input parameter: 5V 100mA (All technical specifications should be subject to practical performance.)
NRR 23dB Tested in accordance with ANSI s3.19-1974 In-ear
The NRR calculated from these bboratorybased attenuation data is 23
Improper fit of this device will reduce its effectiveness in attenuating noise. Consult instructions for proper fit. The level of noise entering a person’s ears when a hearing protector is worn as directed is closely approximated by the difference between the A-weighted environmental noise level and the NRR.
Example:
- The environmental noise level as measured at the ear is 91 dB(A).
- The NRR is 23 decibels (dB)
- The level of noise entering the ear is approximately equal to 91 dB-23 68 dB(A).
Tips
- Before use. please read the manual carefully and keep it for future reference.
- Charge earplugs completely before first use.
- If the earplugs cannot be found by your device, please check whether it is in pairing mode. if left unconnected for a long time, the earplugs will exit pairing mode; if a procedure error of your device occurs, reboot it; if a procedure error of the earplugs occurs, reboot or reset it.
Warnings
- Never disassemble or modify your earplugs or charging case for any reason.
- Do not store earplugs or charging cases in extrenme temperatures (Below 32°F or 110°F).
- Recharge before use if earplugs are left unused for Over two weeks.
- Do not use harsh chemicals to clean earplugs or charging cases.
- Keep earplugs and charging case dry.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: For noise environments dominated by frequencies below 500Hz, the C-weighted environment noise level should be used.
Although hearing protectors can be recommended for protection against the harmful effects of impulsive noise, the reduction rating (NRR) is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulsive noise such as gunfire.
FCC Requirement
changes or modifications not expressly approved by the party responsible for
compliance could void the user s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRoDUCT; FAILURE TO FOLLow WARNINGS MAY REsULT IN SERIOUS PERSONAL INJURY, INCLUDING HEARING LOSS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>