SCORECAST SC1000 Electronic Scoreboard User Manual
- June 5, 2024
- SCORECAST
Table of Contents
SCORECAST SC1000 Electronic Scoreboard
Thank you for purchasing your ScoreCast Team Scoreboard! For more info please visit us at https://scorecast-the-team-scoreboard.myshopify.com/ Battery Power The scoreboard unit will require 4 qty D-Cell batteries (not included) to operate. Use the hex key on the backside of the unit to open the battery compartment. Insert batteries as indicated, and push cells to the left. The battery life expectancy is 80 continuous hours.
- Start Scoring You will first need to download the ScoreCast Scoreboard app to your mobile device found in the App Store or Google Play. Once downloaded, power on your scoreboard and connect your app using Bluetooth technology. A 4 digit security code will appear when you power up the display.
- Construction The scoreboard is designed to withstand high heat exposure and is 100% waterproof. Drainage holes are built into the bottom side of the unit to, empty water accumulation. The LED ticker display is protected by durable clear, polycarbonate. Use a scratch resistant cloth and alcohol or water to clean the window.
- Hanging Method Two qty carabiner hooks are supplied with the scoreboard. Clip these into the top side as shown below.
- Graphic installation Customized team graphics can be ordered at: https://scorecast-the-team-scoreboard.myshopify.com/.
- To install the graphic, simply slide the graphic under the left side tab and snap into place under the right side tab.
Product specification sheet
| Item | Name | Specification |
|---|---|---|
| 1 | Product Dimension | L476MM W344 H60MM |
| 2 | Voltage | Typ DC6V (Min4.0V,Max12V) |
| 3 | Power Source | 4pcs*LR20 Batteries |
| 4 | Power Consumption | < 5W |
| 5 | Autonomy Time | >80H |
| 6 | Water proof | IP65 |
| 7 | Working Temperature | -20℃～+40℃ |
Warning: Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
FIREBOLT GROUP INC
- 28059 Center Oaks Ct., Wixom, MI 48393
- 248.624.8880
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>