ASUS ROG Ryujin II Liquid CPU Cooler User Guide

ROG Ryujin II Liquid CPU Cooler
User Guide

Package contents

NOTE: The Intel Mounting bracket comes pre-installed on the AIO Cooler.

Installing the AIO cooler

NOTE: The illustrations in this section are for reference only, but the installation steps remain the same.

INTEL
A. Install the Intel backplate
NOTE: Skip step A for LGA 20XX sockets.

B. Install the Intel standoff screws

C. Install the AIO pump

AND
A. Remove the Intel Mounting Bracket

B. Install the AMD Mounting Bracket
NOTE: Skip step C for TR4 sockets.

C. Remove the pre-installed heatsink mount then install the standoff screws

D. Install the AIO pump

SETUP

Installing the AIO Radiator

IMPORTANT! Ensure to use the washers when installing the fan and radiator combo to your PC chassis.

Connect the AIO pump cables

Install the AIO Fan Controller

Fan Controller headers

• A fan header allows you to connect fans to cool the system.
• ARGB header allows you to connect to the addressable connectors of your fans.

Download control software

Please visit the product support page at https://rog.asus.com/ to download and install the control software.

Support and FAQ

Q: What should I do if a CPU Fan Error error message pops up?
A: Enter BIOS, then go to Monitor and set CPU FAN Speed to [Ignore].

Q19970
Revised Edition V2
February 2022

Documents / Resources

| ASUS ROG Ryujin II Liquid CPU Cooler [pdf] User Guide
ROG Ryujin II Liquid CPU Cooler, ROG Ryujin II, Ryujin II, Liquid CPU Cooler, CPU Cooler, Cooler
---|---

References

• ROG - Republic of Gamers｜Global | For Those Who Dare
• ROG - Republic of Gamers｜Global | For Those Who Dare
• ROG - Republic of Gamers｜Global | For Those Who Dare

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>